Viewing all customer Discussions for:

Other

While installing the crank the hinge holding the window on the lower section broke. Cant find part on your website.

I can only find this in white or beige, can I get several in bronze or brown color?

Hi, Stamp shows 29-3. Channel is 1/2" thick. Steel length is 30"

I have many windows that have broken spiral balances. I need the 29 inch spiral balance, pivot shoes, and outside 35 1/2 by 59 1/2 window screen. If I have to replace the sash too, please provide that number too. Thanks. I am a mechanically inclined person and I can perform this task. ... (cont.)

Need 6 balance channels & 3 Sash Guides (plastic in top of window frame)

Storm window won't stay open, I think coil in broken from top piece. I don't have a cut out in frame to remove the coil, I will have to cut it.

Dont know what make. Also need the crank handle.

Replacement part: Window clip for storm door

Need this part.It latches the window tight. I think it is a Crestline window. Casemaster crank out

These parts are chrome, but white would be acceptable or close alternatives.Also, I came across your website looking at storm window repairs. The video was excellent, so I may need to order some parts for it as well.ThanksTerry

I have no clue. No markings on the door either. Looks like from 1970s.

34C pc BSI is the lettering I can find on the metal bar; I would appreciate help in locating the replacement and a video instruction to install.

No markings are found on the hardware. Each set of rollers (2 rollers per set) has and adjustment screw and a screw to attach the mechanism to the door, one mechanism on the right and one mechanism on the left. I have two sets of patio doors that need replacement rollers.

Kinco window from a home built in 2003. the metal is 29" long and 1/2" wide stamp on the back says 2850

this is for a Kinco Window on the home built in 2003 the metal is 30" long and 1/2 inch wide. there is a stamp on the back that says 26 9 and them some letters i can not read.

Crank is striped out and lock needs replaced

need to find out which one will work for me

Window was installed 10 years ago. The keeper has a small cut out so that it can sit properly on the frame of the window.

Can you tell me the name of the cover and if you have available to purchase?

The sprocket inside handle has lost some teeth and won't lock.