Viewing all customer Discussions for:

Other

They are for an unknown brand vinyl double hung window. They have 2 screws that secure them to the bottom of the windows.

Attached are 2 pictures of the metal knobs which go on the outside sill. (there is a screw driver slot on the top of the knob) and 3 pictures of the plastic piece which goes into the outside window frame. The bottom of the screen has 2 holes which fit over the knobs on the sill. The spring pi ... (cont.)

I have been unable to track down this lock in stores or online. We purchased an older home and the previous owners changed 1 lock. We would like to match them. Thank you.

Honestly I just can show you pictures. Looking for these parts.

Looking for a replacement for broken track. 14.5 inches long

Drawer slide from an old nitestand. 14 7/16 in long, appx 3/4 inch wide. Apparent mounting tab on one end broken off. No markings that I could find. Please let me know if you can help with finding a replacement. Thank you, Mike.

Nylon housing, brass wheel. Fits in bottom of window. Part is approximately 1 1/8 to 1 3/16 long, 9/16 high and 7/16 wide. The wheel is about 1/2 inch across. I need to order 8. What part number do I use and are they available? Thanks

Definitely 27 inch metal part. The ends are definitely one inch, not 1 and 3/32". The stamped marking is confusing me. All I can find is 26B. Can you help me with this information and theses pictures?

Looking for A sliding glass door replacement lat h

This is the adjustment screw for the bottom door wheel. The wheel has no housing. This piece has broken off.

Hi, I am trying to order the coil, but im having a hard time trying to figure out which one it is. I know its 6 lbs but i dont know the exact coil because the end is broken off. I sent a pick of the broken coil. If there is one that you could recommend it would be appreciated. The windows are a pret ... (cont.)

Looking for this roller.. hooping you guys can help. Thank you in advance.

Caradco 4101341 door lock thimb knob replacement

China cabinet drawer glide two are needed can you help me?

Looking for a replacement slider for window. Part has T-shape plastic guide on bottom. Window has rectangle tab that engages and rotates with window when tilted back into installed position. Top has small angle fitting to hold string. Inside channel is a long spring and pulley. Metal channel is ... (cont.)

I am not sure what to order to replace these broken hinges.

Hi...It looks like the first picture has 3000 imprinted on it and the 3rd picture has 2800 imprinted on it. Could you please tell me if the part code S770-28 is the correct item to order and if so what would be correct part option.Thank You,Rob

When you turn the window crank it no longer will open or close the window. You have to turn the crank while pushing the window open or pulling the window closed. Function of the mechanics of opening and closing window work. It's like the crank is no longer connected to the mechanics when turning ... (cont.)

I have casement windows that the hardware says "Entry Gard Truth". The weatherstripping has an offset kerf with a 1/4" diameter foam bulb (see photos attached). The kerf slot in the window measures 1/8" wide. I am not seeing a good replacement on your site. Perhaps the 58-170B would work but I s ... (cont.)

Need to replace these with a more modern finish