Viewing all customer Discussions for:

Other

Custom order request- I need a pair of 32" Series 751 Channel Balances S751-32, each with a 15-197 locking terminal. The sash weighs 29 pounds, so I'm figuring the 31HD option. Can you please reply with a quote. Thank you.

Item 1. Two spring coils with plastic casing and screws x 10 sets ( ten pieces of 2 coils in plastic casing for 5 windows, each window takes two pieces) Item 2. Latches x 12 ( ordering 2 extra) Item 3: 2 pieces of 2 coil springs mounted in plastic with hardware and latches -2. Each side of the windo ... (cont.)

I am replacing the seal on my boat windows. Do you have something close to this?

Need replacement window balances L= 29" Widths and depth of channel is 5/8" Weight of window " 24 lbs Stamp on current balance is 29-4 Top and bottom attachments to balance shown in pictures

I have Milgard windows. Channel balance appears to be 27" long. Text says: "26 4 DW CMC 10"

Hello, I have one older Anderson window that needs both sash balances replaced. One sash has the markings 11600R-2 and B01 14#27 1-86. The other sash balance has the markings 11600-17 and B02 14#27 4-86. Can you please let me know if you have these in stock, what the price is and when they could be ... (cont.)

The door markings are Pella Insulshield A IGMAC P 3-05 I need door sweeps!

I would like to change out this sliding glass door handle so that we have an outdoor KEYED entry. This one does not have a keyed entry and we want to replace it with a keyed entry for increased security

The door has no markings or number, the rollers seem to be about 1 inch in diameter. Thanks for the help!

AAMA/NWWDA 101/ I.S. 2-97 H-R25-44x72 vinyl double hung window. The pivot lock shoe broke at the top, where it attaches to the rivet.

I have several windows that need new side channel balancers. They are 1/2" wide. They are 37" without the plastic ends. The numbers on the metal say 37DS 44 BSI TT. Thank you.

Screen SR-195680 The screen is for a Jeld-Wen casement window. Jeld-Wen says it doesn't make the screens for its windows and cannot help me. I have attached two photos: one with the spring-type tab missing, and one with the tab in place. Thank you.

Do you sell a sliding glass door keyed lock handle for a 1 3/8" thick door

Hi! These balances are for Viking non-tilt vinyl windows approximately 25 years old. Marked "20 4 HP CALDWELL. I looked at your part identifier, and was pretty confident on the bottom shoe, but the top shoe looked a little different than anything else shown. What do you think?

One rod has TRUTH on it; the other one has 6403 on it. I'd like to know a part number and a price quote and delivery time. Thanks.Al

Hi I'd like to replace some broken pivot shoes. The dimensions are: depth: 1/2" width: 1 1/4" length: 2 1/2" They are for a blue tip spiral balance and should fit this pivot bar https://www.swisco.com/Pivot-Bar-3-1_16-inch/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-226 Despite the length diffe ... (cont.)

I have white pile weatherstrip (9/32" x 9/32") that came attached (glued) to a plastic backing piece that slides into my window screen top edge. I'm attaching a few photos of the plastic backing piece to see if you sell a replacement part. It has cracked and is no longer usable. I need a replacement ... (cont.)

I want to replace these items with the proper replacements.

In the winter the door freezes and when we open the door this seal moves toward the far end of the door. Is there a way to keep that from happening?

Can you help me find the right parts to replace the balance shown in the picture please? The frame size is 31ins wide by 27 3/4ins high and is 1 1/4in thick The sash weighs 16.5Lbs.