Viewing all customer Discussions for:

Other

The number on the part is 26 4 FJ. They are 27" long and 1/2" deep. The sash ways 17.5 pounds. Can you help me figure out if this is a 380 or 385 and how much weight?

Hello, My window screen corner is made of some type of metallic substance. It measures 1/2" wide and is 3/16' thick. I am not seeing anything that matches up with this spec. The closest that I see are # 95-129 (3/8 x 3/16)and # 95-054 (3/8 x 3/16 NYLON). The # 95-016 might have been somewhat similar ... (cont.)

Hi, I have Semco window parts and one of the lock is not working. I have attached a picture of it. This is the lock on the right side of the window when you are standing from inside the house. Can you suggest which part will work as replacement forthis THanks mano

hey, i would like to replace the balances on 2 windows. can you help me with which one i need. it also shows 11600-17.

I am really not sure what I need but I have this window in the bathroom and the metal guide that connects the bottom of the window to the frame during open and closing motions has rusted out. I need parts to repair. I included a picture of the other side that is in better shape. Please let me know o ... (cont.)

Need The spring inside

Hi. Stress on handle finally caused screw to break. Attempts to remove did not work. No names or part numbers that I can find.

I have a Showerite By-Pass Showerite door and the clips need replacing. I've uploaded the photo form my manual showing the part numbers 17,18 & 19. Do you have these parts and what is the cost and how do I order? I need 2 but will take 4 if you have them to have extra.Thank you, Jeanneen ... (cont.)

I am having trouble Mami g these parts and looking for them locally.

I need both sides of the window. Springs broke on both. The part number in catalog is 96cq-36RH and left hand also. Note the 6R on the casing.

Hello.. looking for replacement parts, photos attached. Thank you.

Hi, hopefully you can help me out. I have been looking for the replacement of the window crank assembly,the arms are fine. I have been searching for this brand,Truth, replacement parts with no luck. Any information, advice or guidance is hugely appreciated!

Can you replace this

Channel series: S390 Channel length: 44 Channel stamp: 4350 Quantity: 2

My window would not stay up so I removed the two channel balances. They are marked with 23 9 BSI. The metal channel, not including the plastic parts, is 24 inches long. The width is 1/2inch on the front with the writing. The side width is 5/16inch on the side of the bar . I am looking to replace the ... (cont.)

From what I gather this would be a 19 and 5/8 or 11/16, 1/2 inch channel, wings on the top and shoe. Best guess would be the 385. Also which length 19, 20 or 19 5/8 or 11/16? The window weighs 25.5lbs which is above the 1850 stamp option as well. One has markings of "19 9 BSI PV" the other "19 9 ... (cont.)

Hi I've been trying to find someone with comparable parts. I can't find the original manufacturer. The part number I am looking at is 32-e-50 Your S350-32 looks like my balance. Do you know if they might work me? Thanks for your help.

Our KK window crank broke off and need to replace the star inside the handle. Do we need to replace the whole crank mechanism?

this pivot pin is 2.5 inches long with 6236 stamped into underside.

When I took out the bottom window this spring came out of the bottom latch the spring is 1 and 1/2 in Long. I need to order one.can you tell me where it go because I can't figure out where it go. I know it came out of the tilt window because when I took out the window a screw and the spring and lac ... (cont.)