Viewing all customer Discussions for:

Other

Coil balance broken

Have two windows where the cord broke on the left side balancers. Looking to get replacements for the windows. 26C is stamped on the bar, and the cord is attached to a small metal clip at the top of the sash. The clip screws into the sash.

i need to know what part this is for you.. this is a 1/2 inch from an aluminum windo in Florida from the 80's

sash balance and sash coil spring

1 and 3/4 inch part that should look like a T but one side is broken off. Our window now cannot stay up. Where can I get this part? I cannot get a picture of it installed because it is inside the frame.

My handle seem to have broke off and it's need of a replacement. I don't have any specification of the door so I'm not sure which is the right Door handle. Is there anyone that can help me on this matter, I can send pictures if that helps. Also is there anything available with a Key? Thanks In adv ... (cont.)

Channel is 1-5/8" inside X 1/2" inside w/ a 3/4" slot. Total height of window frame = 64".

Hello! I was so happy to find what I thought was the perfect replacement handle for my almost 30 year old sliding glass door. My handle was by ALENCO out of Texas, I can't find that they are still around. I ordered your Item # 82-005...it arrived...it looked perfect...but alas, it is not the same ... (cont.)

I just received my RH Awning Operator (3/8" hole, Part # 39-419). With it there are several parts to link its arm to the arm of the awning window, including a 5/16" Shoulder Crew, 1/4" - 20 Thread (Part # 33-070). Also included is a #10 X 1/2" Pan Head Phillips Screw (Part # 33-081). What I need ar ... (cont.)

Looking for 0ne set. Left and right . Must be identical to photos. Each piece is 36". Thank you.

Hello, I just moved into a house built in 1998 that has a Bonneville Solutions patio door but no screen. The numbers I can see on the serial code are B-35 CCMC#12277. Do you sell a replacement screen door our slider? Thank you.

Hi I?m looking for a single drawer knob/pull from a Thomasville Tamerlane dresser. During refinishing somehow one was misplaced. In the attached photos they?re painted black however were originally brass plated. There?s no serial number on them. Thanks, Krystal

We have some older wood windows that no longer stay up due to the springs inside the track on the sash. And per our city inspection, the windows need to stay up so we are looking to see if we can replace the parts for it vs the entire window.

We need a replacement for very old grass hinge. Numbers on hinge are 1006-30 and 2625081.Thanks...Paul

looking for this

Need to order 2 of these channel balances. Thanks, Ron

The builder installed the 2 sash windows. One of them has broken lower sash tale pin as can be seen on the attached photos. MFR: ELL-1A-L-I VALIDATORSERIES: 200 SH/DW(712/713)TYPE:SINGLE HUNGQUESTION: What would you recommend to fix this problem?If you have any questions please let me know1.Tilt win ... (cont.)

existing door hardware does not latch. Not sure if just the hard side is all that needs to be changed or both pieces...I had ordered a replacement (not correct)Item # 82-211, it is too wide and too tall even though site said 3" x 3/4"I definitely think I need 5/8" wide and the holes at 3 9/16" appe ... (cont.)

All of my windows are beginning to break. First the plastic parts at top of channel balance. Channel balances getting stuck. Entire bottom of window fell out of one window already.

looking for top and sides, both inside and primarily outside weather seals. another contractor, who has since went out of business probably install this door back in the early '90's. On the glass panel, is CFG Tempered, 16 (or 18) CFR 1201 II, SGCC-1804 1/8U. between glass on metal strip is 64203SB ... (cont.)