Viewing all customer Discussions for:

Other

I'm sending a photo of the broken window and another window that is not broken. Is it the coil housing that is broken? I'm not sure what that is called. But, it is broken on both sides, so I need. 2 of them.

Can you please tell me if this is truth? I need to repel every it as it rusted and broke. Thanks so much

Need to replace a broken assembly

I just bought a house and a lot of these are broken. The booklet left with the house said they are American Craftsman windows maybe series 1000. The pivot bars are all rusted into pieces so I need them too. Help please.2 inches tall, 1 1/4 inches wide 9/16 thick.

I need 4ea balance springs, metal channel is 1/2" by 28" without top & bottom pieces. #2740 stamped on side. I need 8ea of the little tiny clips the go on the sides of the sash. I need 2ea of the latches, holes are 2 1/4 in on center, opening for the striker is 3/8th of an inch.

I need to replace both of these. Rods are 35 in long, ? in diameter. They have blue tips, which I didn't see in the on line examples. it is a big window. I'll need two of the bottom pieces, as well.Mike

I'm looking for some help on identifying and possibly purchasing some broken pieces on my window. I think they are called spiral balance shoes. Thanks, Mike

Looking for a roller like this off a patio door unknown name and mode

Spiral Balance is round with white cover and is 28" long, 3/8" wide and has red tip Pivot shoe is 2" long, 1' wide and 1/2" deep. Will replace mechanism on both sides, just need something that works. Stationary top sash ans pivoting bottom sash.

Hello Can you help with this coil balance? I have included other parts that i have identified, in case they help.

Hi, I am looking for some windows parts and a quote. (1) Vinyl window beads 5/8" wide and (2) window lock/opener as mark. The window lever/opener does not work all the time.

We have 2 closets with 2 Monarch mirror sliding doors on each. We need to replace the door pulls. Pictures above. The number for the doors is either 5170903 or 5170993. Any idea where we could find them or something equivalent.

I'm looking to replace a missing strip of glazing bead on a large kitchen window. I believe Anderson no longer makes this part but instead of replacing all of them was hoping there was an alternative part that would work.

22" Long 7/16" wide w/2 vertical catches each 1/8" tall with a small 'T' on their top. Catches slip into an aluminum track on the bottom of the shower door. Catches measure 5/16" from outside T to outside T and 5/32" inside T to inside T. Sweep is 1/2" and comes off at an inverted 'L' from the po ... (cont.)

Looking for a kawneer commercial door astragal

Stuck at determining which cranks I will need.I can't tell if it's the 39-188/187 or the 39-090-089 combo based on the orientation.

The pivot pins are rusted and need to be replaced looking for parts for a a a aluminum stamping series 1000 MST4664

have an mid 80's andersen patio door with these clips that hold the grille in place. any help?

The plastic is holding a 33" 5/8 spiral in place. 1 1/2 " wide. Crystal brand window. Could 10 off these be added to my order placed Saturday Thanks, Jim

can you help me locate this window roller? 2" long 3/8" wide body 3/4" with the end cap wheel is 1/2" diameter/wide are you able to find the exact model? if not a suitable replacement?