Viewing all customer Discussions for:

Other

Need a replacement lock for a sliding glass door. The lock is 10 inches long

Dear Swisco, Please let me know if you carry this hinge. It is 4 inches with a 5/8 radius I believe. I need satin nickel. Thank you!

Looking for a pivot pin to match this one shown in the picture. Here are some specs of the piece. Length ? 2 ½" Hole spacing ? 1" Width ? 5/16" Thickness ? 3/16" Screw Length ? ½" Thanks, Jay

On andersen site they said replace with part 1521608,thanks the arm is attached to window with a latch that allows for easy removal -ANDERSEN AWNING OPERATOR KITProduct Code: 39-206from your site this looks like the replacement the only difference is the window attachment hardware is 6 15/16 on your ... (cont.)

My sliding door does not lock.I would like to find a replacement for the attached lock.If you can please let me know If you have It in stock and whats the item #?Where the pulse locks into is missing on my sliding door frame.You can see it on the attached picture. I just bought this house If you can ... (cont.)

Hello, I would like to put a key locking handle on my existing patio door. I have attached some pictures of my handles and door. Please let me know what part number i need to order. Also, would I be able to put a Kwikset lock in the handle? I would like the key to match my front doors which use Kwi ... (cont.)

Correct balance for Nuair window

old style screen door latch. Must operate by spring? I did not take apart yet want to make sure parts are available?

Looking for rear drawer guide bracket for Tassell Hardware #84, 21 5/8 inches.

Hello!Attached are the pictures! Thanks for helping me identify. The length is 15 inches.Thanks and talk soon!!Joel

the rubber seal is foam filled and appears to be .300 in across. The retainer part is 3/16 inch wide and the base the bubble attaches to is 1/2 across.

Hello,It looks like your t-lock shoe is similar to the one that comes with our S795, with one exception. Your shoe has a groove in it that ours does not. This difference will keep you from replacing just the bottom attachment. We can offer a replacement, but you'll need to replace the balances on bo ... (cont.)

I am looking for 2 replacement rollers for our sliding glass door. I'm hoping these pictures are enough to go by. The door is approximately 30 years old. I hope this is all your need.3

I am looking to replace both the spiral balance and the shoes in 4 of my double hung windows. For the Spirals: they are 29" long and appear to be 9/16" in diameter. There is a blue tip at the bottom of the ones I want to replace. Is that an indicator that I should order the replacements with blue ... (cont.)

Hi, I'm wondering which piece i need to replace this arm operator. The picture is a bit off as the ruler starts right at the end of the operator but doesn't appear that way. thanks, Mike

Hello! I am looking for corner inserts for a Pella Storm Window per the pictures and sketch I attached. Do you know where I can find these for purchase?

I believe your Product Code: 58-181 is the exact match - however, thought I would check before ordering. Quick follow up question, is it best practice to replace both sides and top if one side has failed?

I am a home owner and I need some replacement window channel balances. See picture attachments to show you how they look. The number is 2420. Our house was built in 1979. Manufacturer is unknown. I have 2 windows I need to fix. I hope the ends are assembled. Hoping you can help. Rex ... (cont.)

I cannot find a logo to help me identify window manufacturer. The channel itself has this stamped on it: 16C BSI TK

I need these parts both right and left