Viewing all customer Discussions for:

Other

What type of snap in window casing is this?

Please advise me on the parts I need. The window is 15 pounds and the pivot bar is broken as you can see in the pictures. This the part that is on the bottom of the window. The spring is 3/4" wide. There is a stamp on the spring, 1C J

My window open by cranking the handle bar. Now the bar is lose and it doesn't connects to the gears

25+ Old Alenco window bottom seals

Looking to replace the balance on an Andersen Window installed around 1985 roughly 36 X 32" bottom glass pane. Assume its a Narroline 200 series as windows do not tilt for easy cleaning. Which replacement balance parts do I need?

I need to replace this crank. It is from a small window, probably 16 to 18 inches. The date on the back is 10/29/13. 09:57A. The manufacturer stamp says TRUTH. Is this a part you carry? How can I get one.

Hello, Paul, I am looking to buy 24 pieces of Milgard Single Hang Slide Windows stopper to control the balance. Attached is the photo of the broken one. What is the component name? Thanks in advance. Where I can buy the missing balance? Thanks in advance for your help.

Hi, I need two window balancers for a Milgard, single hung window. I'm guessing it is about 20 years old. The width is 1/2" and the length of the metal is 15". The following is stamped on the metal: 14 2 DO CALDWELL Thanks!

Hi: We can't tell if we need an S 380 or an S 385 channel balance. It is hard to measure the shoe, so we attached some pictures. Markings on the part are 32-3 BA CMC 7. Photos attached. Thank you.

I need to identify a window channel balance. Please see the pictures attached. The total length minus the attachments is 21". Thanks,

Roto window: has the number "Roto HC04-2000" ON IT HOWEVER THAT IS NOT THE PART NUMBER

Would you please let me know if you can get me 10 of these rollers. They are for kitchen cabinet drawers. Thank you David

I can't find a brand name on my vinyl windows anywhere they seem to be pretty common double hung vinyl windows. I need several of these tilt pivots.

Please let me know which part number I need to order to replace this single-hung (non-tilting) window balance. Thanks

Hi...I have a Forever view storm door (see attached door1.JPG). The handle is about to fall off, and is so loose I can't open the door. I think the solution is to tighten the door handle, but I don't have the proper tool. I've tried allen wrenches...star wrench...but nothing I can find seems to fit ... (cont.)

Has the # 123 on the side. Looks like a 81-032B. Not sure if diameter matches. I would love to have an upgrade to a better roller if possible. My grandkids can't open the door by their self

Please provide nomenclature and part # for these double hung windows

Hi Swisco, Looking for a replacement for this part. The part is made of metal and is 2-1/2" long. It has one hole that is 1-1/8" from the straight edge. The numbers 1441-1 are inscribed on it. Part came from a vinyl double-hung window and fits in a in a locking shoe. Thank you!

Have browsed through your inventory and cannot find this. The closest one to it is (Part #26-169). See attached photo

I find this number 28 4 CALDWELL LM