Viewing all customer Discussions for:

Other

Require a complete Papaiz 323 storm door lock set. Do you ship to Canada?

Part #26 5 CW CMC 10

Just a small nylon pivot which screws to the corner of the window frame

I need this replacement lock for sliding screen door, can you help me?

Trying to find screen parts for Weather Shield Window screens. Part # 979018 white nylon knob (15.0). We have the other parts, but the nylon knobs break occasionally and we have used up the ones we had as extras from Weather Shield several years ago.

The photo shows the part I had removed. Screw holes are 2 1/2 inches apart center to center. Everything else looks fine.

is out of window on one side. window is stuck in full open position. my channel balance has 1640p stamped on it. it's about 18" long with a plastic guide on each end and a pulley system within. how can i proceed?

Thanks for your prompt response Attached please find new pictures as requested. Magazine , should you need any further information , please let me know ASAP as I need them urgently Hope this will clarify the reference needed do I can place the order Waiting for your instructions

hi, so you sell the channel or the string with the hook ? Thank you! Albert

certainTeed window tilt lock.Measures about 3 & 1/2" x 3/4". Any idea where i can get this

I have a tilt in double hung window with green tip, 5/8" diameter, 21 inch long balance tubes. I don't see this color tube listed. Is it available? If so, the price? Thanks, Larry

This part is broken so window lock will not release. I do not know the brand

27" long, 1/2" wide, marked 26 6 EX CMC 4 Need 2.

House was built in 1992 and has a Milgard sliding patio door (sliding door is on inside, with sliding screen on outside). The rollers need to be replaced, but I don't know what type to order. The glass is quite thick, and the numbers on it are: Guardian Kingsburg CA ANSI Z971 Safety Tempered 16CFR ... (cont.)

The hand crank is on the right. The home was built in 1984.

I need one of this piece to place my window back in

We previously identified the 39-387 as the operator closest to what would replace my existing stripped operators for 2 windows. As the photos show, I ordered the incorrect handed ones and was about to order the 39-388. While the length of the arm from the gears to the elbow joint look good, the le ... (cont.)

have a two door sliding patio door. screws wore out attaching door handle and lock to door. information on door is herculite-k mfg. 2004. sgcc 1140 4024 297 8043. would like to have a new handle/lock to fit door or handle/lock that will lock on door frame.

30905 Truth crank operator. Need both left and right operators

I need to replace these plastic clips that keep the sliding bar in place. The only identifying mark is the number "3" in the picture where the finger is pointing. The windows were made by a company no longer in business and I didn't see a manufacturer name on the windows