Viewing all customer Discussions for:

Other

Please let me know if you can get me 2 replacement wheels my email is kaymcg1 @ Verizon. Net

I have awning windows with a chain crank. The gear inside the box is broken. Pieces have chipped off. Do you know where I can get replacement? The handle is Getty, but there are no markings on the rest. The photos below show the operating window and the second photo is the guts of the one that th ... (cont.)

Need availability and per line all foot price.. Bubble is approx 5/16? diameter. Stem approx 3/16?

Looking for replacements for the Sash on a few casement windows. Attached are a few pictures of the seal. Please call meto review. Roger

Looking to replace both latches on this window. I couldn't find the brand of window. any help would be greatly appreciated.

It is marked with 26 3 KQ Caldwell and is 27" in length. there are no additional stamping or markings that I can tell

This looks like the bottom track I need for my Safety Mirror Sliding Glass Door. The only tag I found on my door was a Stanley/Monarch Co. which I understand is out of business. Do you have this part if so, the cost and how long would it be to receive it?

I am looking for a replacement window crank for an Eagle window. This window is approximately 20 years old. The part need ing replacement is on the right side of the 3 window unit. Please let me know if you can get me this part.

Please if you can tell me where can l find casement with crank handle op05--1509.

Can you suggest a replacement door lock/handle for this Larson Storm Door? I have attached a picture.

Please take a look at the spiral balance and the attached metal clip and let me know what can be used as a replacement tube diameter looks like 3/8"

Hi. I figured out how to pull the windows, however I'm needing some assistance in finding the correct part number. Actually the right series. Here's a top and bottom photo for the two I need help with: -2820 -1620M Thanks. Jeff

These channel balances are 24 inches long ( the white metal part), and are 1/2 inch wide. Apparently are spring loaded with a little clip attached to the draw string that fits into a hole on the window frame. There is a number on the part B.S.I. 2320. I would need 2 of these, one for each side of ... (cont.)

my old balancer has part # 11600-2 and E47 9 27 11 82. what replacement model # do you recommend?

Looking for balance bar 3340 BSI UL

The rollers are 15/16" (23 mm) in diameter. The glass is 5/16" (8 mm) thick. The center of the mounting hole is 3/4" (19 mm) from the edge of the glass. The hole in the glass is 5/16" (8 mm) in diameter. These parts are apparently imports from Europe, but they don't ship to US.

Double hung from the 80s. Lower window is 35 15/16" High X 32 7/16" wide and upper window is 23 15/16" high X 32 7/16" wide. Can you help? Need two left balances and a right. Thanks! Matt

there are several models very similar I'm not sure which one is I hope your help thanks, it's the piece that go to the sides of the window

I HAVE THE PART NUMB.AND THE NAME OF THE COMPANY . I SAW ONE SIMILAR TO IT ON YOUR SITE BUT WANTED TO MAKE SURE IT WAS THE RIGHT ONE.ITEAM NUMB.7905391..PINE VALLEY WAS THE COMP. THANK YOU

Hi, I would like to make sure that I order the correct window balancers. It is for a Milgard Window the balancer has the following identification 26 4 HU CMC 5. Thank you for the helo.