Viewing all customer Discussions for:

Other

plastic track with metal bar that the door rides on . Track is about 6 inches wide,and metal bar guides the door. Door is about 20 years old. Door is glass with wood trim, and very heavy.

We have a combination spiral and spring inside a plastic sleeve

I am looking for the white tabs that hold my screens in place

We have an international brand sliding glass door and the bottom wheels are worn out. Size of the door is 48

I'm looking for tilt window latch with these dimensions: 3 3/8 long, 7/8 inches wide, 5/16 inches deep, hole-to-hole 2 7/16 in./ and from hole to edge of plunger is 21/32. I'm having great difficulty finding anything less than 1 inch wide. Would you have a latch with these dimensions? Howard ... (cont.)

Metal guide is about 33 inches long and 1/2" wide

It's the pivot bar from the bottom sash of a double-pane, tiltable vinyl window. It has no numbers or other markings whatsoever. It looks very close, but not identical, to the one you list as 26-129. My biggest worry about 26-129 is that it's 3/8" thick, whereas this one is only 1/4". If you l ... (cont.)

Guardian door made in Geniva, NY need two

I NEED A REPLACEMENT HANDLE FOR # 2260

Been looking for these

Hello, We have a Viking sliding glass door from the 1990's that needs to have all rollers replaced. The markings found on the inside window casing are as follows: VIKING EMPSEAL A.L.I. VI-1 (or V1-1 or VI-I) CLASS A Would this be enough information to find out which rollers we need to repla ... (cont.)

16cfr1201c11 ansiz 97.1 1975 1/8'-u sccc-1110 4012183

I have Philips windows in a 1990 MH. 19", orange, 3/8" None of your end fittings look anything like mine. Will they fit my window?

30 yr old bronz aluminum window frames. Looking for bronz snap bead 1/2

I am looking for the plastic grills for the glass in Staley steel doors.

I am an representing a woman that is looking for what looks like a pivot pin to the above mentioned certainteed window. I cannot send you a photo, but it is a metal bar approx. 2 1/4 inches long and 5/8 inches wide with a 90 degree angle at the end that has a 7/8 inch pin protruding from it.It attac ... (cont.)

First my house is over 25 years old and I am guessing so are the windows. My windows tilt in so you can wash them the part I am looking for is located in the top left hand corner of the bottom window. It is the part that you operate to release the window and then to snap back in place. It has a l ... (cont.)

Need the lower sash and spring cables which attach to the lower sash of the window.

Where can I get this?

the registration number is 02290094548 0122 (not sure if this helps). The door is 1.5" thick, the hardware is a multi point (2) brass. Bought roughly ten years ago. Looking for the complete handle/lock assembly. The locking mechanism is below the handle. The cover plate for the latch/lock is 7 5/8 ... (cont.)