Viewing all customer Discussions for:

Other

I believe this is a 31? 385. Trying to figure out weight?

Good Morning, The identifying marking on the CB is: 28 3 FN CALDWELL. I would like to purchase (2), one for each side. THANK YOU! Mary

I have old camper windows called hehr classic windows with a center operator. I have photo's; do you carry these?

Length is 22 inches, width is 0.5 inches. Only Markings are 21 3 JP Caldwell I think I need a 22" series 395, but unsure of the option Thank you for your help

Verticle plastic insulator that the leading edge of the door when closing fits into on the frame to keep out the out-of-doors.

The spiral closer I'm trying to replace doesn't have a color plastic tip. It's 28" long and 3/8" dia.

I have 11 aluminum sunroom windows manufactured about 10 years ago. It seems the weatherstripping is worn & I get some freezing along the top header frame in temp extremes. Due to the crush or wear, it's hard to tell which size to order. The window track width is 1.260". The base of the strip meas ... (cont.)

I have included pictures of the broken balance I need to replace. I believe the balance is a 351, but wanted you to help confirm based on my measurements. It has 21-4 stamped on it, but no other markings. I will be sending another part iD post separately for the other broken part on the same window ... (cont.)

Hello, I need new rollers for a sliding glass door I believe was manufactured in 2/90. There is a number etched in between the panes on both of my sliders so I'm assuming it is a serial number of some sort. 2-90 (Date?)MG-2 (Milguard?) They are the local window manufacturer ASTM77481A. The d ... (cont.)

I have ~10 y old vinyl, single hung windows - builder installed. Apparently, Jeld-Wen. Several balances are broken (plastic retainer broken). Any suggestion what type they are? Any generic replacements? Jeld-Wen lists 3 types of 28 inch balances on their website, but can't tell what type I have... ... (cont.)

Size is 3 inches long, 5/16 inch wide and 3/16 thick need both right and left

Iam looking for top and bottom tracks for my Stanley monarch folding glass door do you carry them

Only markings appear to read 20 5 DN Caldwell.The length appears to be 21 inches and 1/2 wide. Looking for 2 replacement balances.

I need to replace these window balances. The ID on the balance is 25 9 34# IM Caldwell. It measures, from the tip of the plastic - 26 3/4". Any help is greatly appreciated.

I saw on your web site someone else had the same issue. Crestline window were used in my home when it was built in 1995. I have include pictures of the operating assembly. If need anything else please let me know. Hope you can help

Generic number is 11600-17 Numbers in end read 931 r67 501 This is left side Rideside has same generic 11600-17 The stamped number on end is 931 r70 801. Which replacement things do I need? Thanks in advance!!

Looking for replacement parts for my ACORN windows, I need the entire crank assembly.

the windows have plastic channels

I?m looking for replacement pins for my window screen.

I have a 11600-3 D51 7#27 3-86 needed to know what balancer is needed thanks.