Viewing all customer Discussions for:

Other

Here is a photo of Part 'DSH 20121' requested earlier today Thank you Ross

I'm changing the floor and i want to replace the 8 ft. track which is about 20 years??

Need to replace channel balances on windows made by simonton. litehouse series. tag on window 9080372/11

Has identifying numbers 18 3 CU CMC 2

Part no# 2265and 2260

Some ropes broken. Shoe is stuck at bottom does not slide up and down track Are there different sizes or are parts standard?

Hello, I am selling my house and need to repair 2 double-hung windows. The side-sash spring latches have seen better days. I'd like to replace all 8 latches and springs if possible. Can you please help me find the new parts I need? Here are photos of the windows and the sash parts. Thank you, Mike ... (cont.)

Looking for a replacement coil balance for window with no markings of manufacturer. Thanks Fred

I have a patio door with PPG Herculite K glass with 16CFR1201 1984 id numbers. Is this enough information to identify the door so I can 0rder new rollers?ppg hurculite k, 16cfr1201 (1984)

I have own my home for 30 yrs with care free windows I would like to know if their are replacement parts for the gaskets around the window to reseale them from leaking ? They have been a great window for me and I do my own repairs so was wondering if the made kits for them thank you Gail S ... (cont.)

Could you please narrow down the pivot that I need. The window manufacturer is Barber and Ross...don't know how I remembered that. The aluminum pivot bar screws into the top of the window with one screw. After the 90 degree bend it is 5/8 inches long (measured from the inside of the bend). The l ... (cont.)

I need to replace counter balance in an equal sash double hung window. Its the trimline with the double pane 3/8". glass area is 20" x 24"

I need a pair of 1/2 in Channel balances for these Jordan windows Bay window center Part ID 24 3 CALDWELL GM Guest room Part ID 24 4 CALDWELL

Hi. I hope you can help me resolve a kitchen window that is missing a part. because of this, the window hangs down on one side. One photo shows the part in place at the top of the window. The other photo shows where the part USED to be and which is now missing. I believe this is causing the mal ... (cont.)

Can you help with this pivot bar? Thanks Rich

Windows Type; Classic by Mayfair Actual entire window: 5'- 10.5" x 3' - 8" Individual panes 13.25" Tall x 10.5" wide (20 total panes per window)- I have 3 windows with the above dimensions and I need to replace the snap glazing. I have attached a png of the end view of the existing glazing. ... (cont.)

It looks like there are predrilled holes on the aluminum drip rail to screw into the framed door. How many are there and how far apart are they? Also, my shower door is 33 1/3 inches. Can this drip rail be sawed?

I live in a house built in 1993 with single pane double hung windows that were made in Mexico. Are there balances that I can purchase to fix the windows that I have to hold up with a wooden stick? What do I need to do to get you correct measurements? Thank you for helping. Ron P

The 32-312 looks like the ones on my sliding kitchen drawers also. Home was built in 1973. I guess even though they are for shelves but have worked for 45 years I need to order some.

I just purchased 12 of the above product from your company. It appears the tacks that were previously in the furniture were broken off flush with the surface. I can see the pin still in the hole. Where should I place the new tack, in front beside or behind the one left in place? Thank you for yo ... (cont.)