Viewing all customer Discussions for:

Other

Im trying to identify this part, the balancer spring hooks to the top of it and the window sash piviots in it. Need help please.

IThe townhouse I purchased April 2016 has single hung vinyl windows. In May 2016 after a few consecutive days of rain, I had an infestation of carpenter ants. It was then discovered three of the six windows were leaking which the home inspector failed to include in his report prior to closing. It ... (cont.)

Can I just buy the string for 26' series 385 channel balance or I have to buy the whole channel balance? Thank you

I have the kinco heavy duty windows installed in my home which was built in 2013. How do they compare to high impact windows?

plygem 3750 series came with a spiral balancer but there is a block & tackle replacement. i am looking for a 28B

We think the window is Better Bilt. Installed 2005. Window is 2-0 x 3-0 single hung vinyl insulated The metal measures 13-5/8" excluding any plastic portion on top or bottom Stamped on the back is 13 2 PP and stamped at a 90 is B S I Can you determine what part I need?

Hello, Last year I ordered (order #830461) part SERIES 600 SPIRAL TILT WINDOW BALANCE (red). However, after comparing it with the part needing to be replaced, I realized that the new part is slightly smaller in diameter. Also, the new part Pivot Shoe, 9/16" Thick is also smaller than the rep ... (cont.)

cant find window manufacturer or part number

Hi, I am trying to replace a broken window coil balance spring (see attached images). From the broken pieces, I believe I am looking for an 8 lb spring. Could you help me identify the spring needed? thank you

The coils of the coil balancer are broken in multiple windows. 1 window measures ~17" tall for the sash (1/2 of the window) and 2 other windows that measure ~31" for the sash. Please let me know if you you can identify what parts to buy from the attached pictures. If not, please let me know where t ... (cont.)

The part number on the window looks like 8254. The part number on the inside of the window is 19hd. I can't find these parts at any local window dealers in the area. They all claim that they have never seen anything like that. Please help me locate these parts.

Hello - I cannot find the replacement part for this drawer glide. I do know that it is yours. the stamp number on the part is R-40-28. It may have changed again, your website says it did? Thank you Max

I'm a architect/wood worker and I'm building a frame for a over/under sliding whiteboard. Do you think I could use your spiral balances to counter balance the white boards? They will be 5'W x 4'H. Next question is how to do you measure the size needed? Does the balance body need to match the height ... (cont.)

i need 36 feet of 760013 weathersheild weatherstripping and 8 feet of 760431 weathersheild weatherstripping

I need a lock/latch for a 3 Rivers sliding window tra-5-81. The original lock/latch is broken. It is a picture window with a sliding window (smaller) on each side. I am wondering if this 90-193 will work. If not, do you have any other suggestions. Thanks for any help you can give me!! ... (cont.)

I need one left hand lever and one right hand lever. All in Stainless finish.

I need the part that connects the ballast to the window. It is about 3 in. long rectangle about 1/4 in. thick with two holes for screws and end is rounded to allow window to pivot in for cleaning. From Andy

LOOKING TO REPLACE THE SHOE ON THIS AWNING WINDOW

Looking for replacement rubber gasket for outside windowof Classic by Mayfair windows

1/2 inch channel. There is a folded over lip on the edge. The metal portion is almost 27" long. It has the letters "26 5 EU CMC 2" printed on it.