Viewing all customer Discussions for:

Other

Can I still purchase and instal?

Left side coil balance shoe for Capital window sash. Are you able to confirm the part from this pic?

Looking to replace snap-in tilt latch set, but having trouble finding the correct part. The original has markings of PAT #5,139,291. Also has marking of 92 on the latch itself, and 8A on the body. Need both letf and right latches. Rough demensions are L-3", W-10/16", & H-7/16". ... (cont.)

The inside latch pin is broken

Hello I have window balancers stamped 23A - 26C and 29A. they are the 385 series but i dont know the weight of sash. please let me know which balance( Example 2320 etc.) will be compatable

Hi. Please could you help me identify this part. It is balance for a double hung window. Thanks, David

Can you please identify the matching old metal sliding patio door roller? Door doesn't have a screw to hold the roller (only one hole for adjustment screw on the door; no second screw or hole to attach the roller). To take out the old roller, I removed the sliding door, removed bottom panel of ... (cont.)

I have these windows and idk what brand they are. I need a few parts for different windows. I will provide some pics.1. Window pin broke off the plastic bottom (about 10.5"L x .5"W))of window where it screws into 3" metal pin (on the right side). I'm not sure if there is a replacement part for th ... (cont.)

I have several sliding glass Norco doors. I took the door out, cleaned and lubricated the rooler assembly and they work much better but the wheel bearings are not good. I would like to replace the roller assembles. I am hoping you have a match.

See photos of Vinyl Master double hung window. Note the right plastic pivot shoe is missing the metal locking mechanism and it appears that the plastic is cracked on the bottom (Maybe that is why the metal locking mechanism is gone - it fell out. Can you send me a replacement right pivot shoe? I w ... (cont.)

No name square Damaged teeth slipping 10¾" from center bolt to end of square shift. Has a square key on crank side

Do you have this type of hardware? Cost.

I need to replace several "Tilt Window Latches" but I'm sure which latches I need. The attached photo is of a sticker I found on the side of the window. I'm hoping you can use the information on the sticker to tell me what Tilt Window Latch I need. Thank You

Loookinh for this window crank please guide me to correct directions to purchase asap thank you

Need right and left hand replacement - looks like might have been obsolete - looks like nwer model is rounded corners which is fine- need set right window and left. Depending on price probably will replace 3 window sets

Hello, We have a customer that needs a replacement lock that is pictured. Can't find any markings on the window that give us any more information. Any help would be awesome! Thanks, Sam

Wellborn cabinets from 20ish years ago. Just need the plastic bracket that the rail is held in place by.

Window is a Weathershield Visions 2500. Coil balancer is marked with the number 10.

Number stamped into metal spring is 427.Need pair for 4 windows. Thank you

This is a shoe for a window with spiral valance looking for a part number