Viewing all customer Discussions for:

Other

I need pivot bars to replace these and go into pivot shoe with 9R marking on it. Photos include broken pivot bars, shoe, and where they insert on the actual window. Thank you for your help

Thank you.

Looking to replace 3 left latches and 1 right latch but understand these need to be purchased in pairs. Size measures 2 5/8" L, 5/8" W, 3/8" D. Need white. Wasn't sure if the 2 3/8" would work. Older Double Hung Spring loaded windows. Pic of Latch is one that a company replaced in 2020. ... (cont.)

Hi there, see the photos attached. i am looking to replace this balance. The length of the metal is 26 inches minus the plastic it is 5/8 deep and 1/2 wide. I need 2 for one window.

Can you locate this locking device for the lower windows please?!

I need a couple of these

I have a customer looking for several replacement parts for some old windows. I'm not sure if it's considered a sash cam or a top sash guide. I can't find an exact match through several online searches.

Looking for part number for tilt latch

I would like to have 6 pairs of these catches if they are availablePer live chat, "I forgot to add that the screw hole centres are 2.625 inches (66.675mm) apart"

What is the drill mhole distance center to center for this hinge?

Lock screw distance 3 3/4" Keeper vertical distance 3 1/4" Door slides into the frame 1/4" I need the keeper that goes with the lock on the door.Thank you so much!

Need help finding these balancer thank uou

1853: 28" Spiral Balance, Sash it holds is 19 lbs. Need (2), 1856:Plastic keeper Need (6), 1862, 1914, 1911 various parts of a block and tackle balance.The Sashes these hold are 16 Lbs for the 26 1/4" piece and 17 Lbs for the 24 1/4" piece Measure ments are length of piece without the top plastic p ... (cont.)

I would like a parts number for this ilder sash in a Viking window.

Hello,I'm trying to see if you have any replacement channel balance for my old weathershield windows. The window model per their website is a 610/810 double hung tilt, part: 980825 for a 32HD balance. These windows are circa 2004, at least when my townhouse was built.I'm looking at your products and ... (cont.)

Hi, my window balance ID is 26 5 JU CMC 2. There are no other markings. Channel width: 1/2" Metal shaft length: 27" Top plastic foot: 15/16" wide, 1 1/4" height Bottom plastic foot: 15/16" wide, 1 1/16" width including curved bottom in last photo.

I need the cover for the coils window balance

I'm trying to identify the weight of the channel balance. My balances are 24" in length and they are stamed with "23 5 AW CMC 2" on the rib of the balance. Does this mean i should select the 2350 model ?

Two (2) Soft close cabinet door hinge. Dimension from center door mount hole to center cabinet mount hole is 1-3/4". Vertical space between mounting hole per surface is also 1-3/4"

Need help finding this latch. Can't seem to find one that matches anywhere.