Viewing all customer Discussions for:

Other

I need to replace the window channel balance on 3 of my windows. I am pretty sure the part I need is S385-23, but can you confirm from these pics? I have 3 identical windows and two have given out. I have to imagine the 3rd will soon. I also need the clips to go with. if you can confirm the part nu ... (cont.)

Please help me identify the correct replacement channel balance to for replacement. I ran out of picture space but there is a stamp "25 3 BT CALDWELL" on the back. The metal portion is 26 inches long.

If I measured correctly the measurements are as follows;7x1 flat side of handle9 1/2 x 1 where curved handle isbetween the screws is - 3 9/16"from top if screws to bottom of screws 4 1/4not sure if I measured correctly. As per the picture the front side where the handle is broken where the screws a ... (cont.)

Sliding Door Wheels Length = 2-3/16” Height = 1-3/16” Wheel Diameter = 1-1/2”

I need to replace these window springs in my bedroom. Just need to make sure im getting the right ones. On the back it says 32 4 KV CMC 9

I have several windows (about 8 windows) that need the balancer replaced. I'm pretty confident I can replace them following you tube tutorials if I get the correct replacement parts.

Good afternoon, I would like to replace some of my worn out Hurd Window crank mechanisms. Could you advise what I should order to replace them. Also, will I be able to use the existing handle and cover with the new mechanism? Thank you!

2 5/8" long x 11/16" wide

I have Simoton double hung windows that need all new balancer kit.

Pella vinyl single hung window. need to replace the coil balancers (9lbs) im looking for the part number or how to get a replacement

Image #3135 above shows a black hole where our locking latch fell out. Not sure what it's called exactly. We have the interior and exterior handles in place and still operational but we cannot lock our door. Image #3137 above seems to be all there unless you see something wrong with it. I think ... (cont.)

there are no marketing or stamps so do not know what part number of springs tube order.

Tilt window - Single Hung Black tip - Sash weights 15.6 lbs, Tube length 32 inches and tube diameter is 5/8 inch. Sliding shoes look ok. Also, What is charging tool I need to release tension on spring? 75006 tool?

Hello, I need to replace this part plus the crank handle for several windows. please advice.

Please see the attached images, these are being used with channel balance #S385-29.

Can you let me know if there are replacement parts for this available or if they are generally available at a place called lowe's or something like that

Not sure of window brand. Guessing they are 90-00s vintage.

Looking for replacement

The part we need looks like the one being held by a woman in the picture when I came to this site. We need to replace the coils for a window installed in a new build from about 2003. The window is 33 1/8 inches wide by 29 7/8 inches in height and 1 3/8 inches thick. The weight is about 18.8 pounds. ... (cont.)

Replacement arm needed.