Viewing all customer Discussions for:

Other

Looking for a replacement of the PlyGem factory handle and mechanism for one that has a keyed lock in black color.

We would like to have a handle on the OUTSDE of our slider. Is it possible to replace the existing handle with a pull on the outside too?

I need one of these.

The lock on my Pella door stopped working. My handle set is intact - I just need a new Mortise for insertion into the door. The numbers I can see on the door are 14E4BZ01 and PELLA - 120413 P0610220313 NFRC PEL -N- 181. There is also UF2412 on the frame.

I am looking for 6 new rollers to replace the old rollers of my glass door closet.

The spring in our window channel balance popped off and created a mess. The channel itself is 39" and marked with 39B. The slider it attaches to looks to be cracked. I think I need a new balance and whatever the slider is called but I can't find an exact match on the site. Looking to replace both si ... (cont.)

I'm looking for replacement astragal for the older Ranger double doors with the spring activated strip where the doors meet. It looks to be about an inch wide with two strips. Astragal for older ranger commercial double doorway.

The one in the first pic fits fine, the other one is too big in diameter (ordered wrong). The cover won't fit. Also, the "foot" at the bottom of the window in the 3rd pic needs replacing on both sides. Unsure of the name. I also need the cover for both sides.Tks!Anita

The door "brand" says Oldcastle Building Envelop" The current weather seal pile seems to be a two strip arrangement held behind a removable plate. The brush pile has worn out and the gap is now wide. So far I have not removed that plate. Looking for any input on what product might directly, or with ... (cont.)

I have old 1964 aluminum awning windows with cranks. Nothing special The part I'm looking for connects to the vent hook (I believe that's the part name). It slides up the window on a track. Otherwise the window doesn't close and I need like 18 of them. I also wonder if there's a way to fabricate one ... (cont.)

Mine has stamped on the back(rear 1 3/8 ) (front 3/4) it has 3 angled slots for attachment and adjustment The left roller has 2 pennies offset the other has 7 pennies offset. The rollers are 3/4" nylon. If there is a better material offered I would prefer that upgrade. If I can be of anymore ... (cont.)

I need two lengths. Stamp picture is included. One is 25 5 BSI pj. The other is 13 2 BSI pj. The lengths are 25 5/8" and 13 5/8". I don't know the manufacturer but they were installed in 2005. I need four of the 13 2 and eight of the 25 5. Thanks

My closet bottom track is missing, It is 2 door mirror, the track measures 45 inches in length and approximately 2-1/2 inches in width and has concave wheels, looking for gold color bottom track, thank you

I have a kitchen cabinet about 40 years old. The screw in part in the second picture is missing and I need a replacement. The hinge itself is shown in the first picture. The plate on the cabinet side is marked as 317.293.50.00. I just need the part that pushes the hinge from the plate. ... (cont.)

This plate stops the door and keeps it from opening. What is the name of this part?

Looking for two weather strip pieces that I can't identify. "Bubble" type (first 3 photos) and the other type is flat, both have the T shape that fits into the channel on the window. I tried to measure but not sure I was accurate. These are basically guesses: The flat one looks to be 8/16"w And th ... (cont.)

Hi. We need this balance for the windows of our hotel. The company that installed them a few years ago brought them from Colombia, according to what they told us. Maybe you can help us find the spare part here. Thank you so much.

Hi I have attached a photo and sketch of the door sweep for a Pella entry door (wood, with full glass, hinged,in swing). It seems to be vinyl. There are two sweeps on this door - one near inside and one near outside. The sweep I need is at the outside bottom of the door. I hope you can identify ... (cont.)

I have a school facility that bought the swisco 10-586 bumper and wants me to install it. She just gave me a photocopy of your installation tool, which doesn't actually come with the bumper keeper. So what is this installation fastener one way thing, and which way is it? There's no picture on your ... (cont.)

I will send more pictures - Thank you!