Viewing all customer Discussions for:

Other

I have old 1964 aluminum awning windows with cranks. Nothing special The part I'm looking for connects to the vent hook (I believe that's the part name). It slides up the window on a track. Otherwise the window doesn't close and I need like 18 of them. I also wonder if there's a way to fabricate one ... (cont.)

Mine has stamped on the back(rear 1 3/8 ) (front 3/4) it has 3 angled slots for attachment and adjustment The left roller has 2 pennies offset the other has 7 pennies offset. The rollers are 3/4" nylon. If there is a better material offered I would prefer that upgrade. If I can be of anymore ... (cont.)

I need two lengths. Stamp picture is included. One is 25 5 BSI pj. The other is 13 2 BSI pj. The lengths are 25 5/8" and 13 5/8". I don't know the manufacturer but they were installed in 2005. I need four of the 13 2 and eight of the 25 5. Thanks

My closet bottom track is missing, It is 2 door mirror, the track measures 45 inches in length and approximately 2-1/2 inches in width and has concave wheels, looking for gold color bottom track, thank you

I have a kitchen cabinet about 40 years old. The screw in part in the second picture is missing and I need a replacement. The hinge itself is shown in the first picture. The plate on the cabinet side is marked as 317.293.50.00. I just need the part that pushes the hinge from the plate. ... (cont.)

This plate stops the door and keeps it from opening. What is the name of this part?

Looking for two weather strip pieces that I can't identify. "Bubble" type (first 3 photos) and the other type is flat, both have the T shape that fits into the channel on the window. I tried to measure but not sure I was accurate. These are basically guesses: The flat one looks to be 8/16"w And th ... (cont.)

Hi. We need this balance for the windows of our hotel. The company that installed them a few years ago brought them from Colombia, according to what they told us. Maybe you can help us find the spare part here. Thank you so much.

Hi I have attached a photo and sketch of the door sweep for a Pella entry door (wood, with full glass, hinged,in swing). It seems to be vinyl. There are two sweeps on this door - one near inside and one near outside. The sweep I need is at the outside bottom of the door. I hope you can identify ... (cont.)

I have a school facility that bought the swisco 10-586 bumper and wants me to install it. She just gave me a photocopy of your installation tool, which doesn't actually come with the bumper keeper. So what is this installation fastener one way thing, and which way is it? There's no picture on your ... (cont.)

I will send more pictures - Thank you!

The tilt keys are marked 1350. The lower keys (no tilt pin) are marked 1349 I have found several keys that are 5/32 thick but none with a 5/32 thick leg and a 3/32 leg. Do I need to get some 5/32 keys and mill one leg down to 3/32? Other suggestions? Thank you!

Please help I.D. the glass stopwe need(10) at 18"(15) at 26 1/4"(5) at 26"painted dark bronze& 60' of the wedge push in glazing vinyl

Balance length: 31.5 Balance stamp: 3125 Balance color: gray Quantity: 2

Hi, I am trying to find this hinge assembly for a number of old windows I'm repairing. The owner wishes to keep the windows as original as possible. I could use 10 to 12 of these. Please let me know what you might have.

all of our cabinet drawers (47 apt. units)- built in 2002 have drawer track back plates with the wording as follows- M.I. germany 543.000, 10.00.( fotos of front and back attached- the drawer tracks are white painted metal with the name uni-frame 2033/597 (23 1/2").The ends of the tracks slide into ... (cont.)

Does the cap that houses the crank arm and worm gear drive have a removal screw (accessible), or is it press fitted (no accessible) for grease and lube purposes?

Need parts, hinges worn out

No mfg. Or writing cept 14 3691*1

Any replacement or compatible?