Viewing all customer Discussions for:

Other

I am looking to replace both the drawer socket and the frame piece. Pictures are included. Need part numbers for both. Thanks!!

I would like to buy a replacement Truth latch. See photo: The latch shown is the right style Truth latch, but the wrong item: The window frame it is installed on has its hinges on the right side of the window frame. When the lever is in the up position, the latch locks, and when it is in the down po ... (cont.)

I'm having a hard time finding one of these replacement locks. Hoping you can help me out. Let Me know. Any help would be greatly appreciated

Hi please help me when the parts for the 2 models, see pictures rubber inside as pictures showing its damaged Rubber for the area where the door connectes too Lock latch, inside part only Handle

Please examine the photos I supplied to see if you can provide replacement weather stripping for my vinyl casement window. This window opens by crank, moving out from the bottom and pivoting from the top. The weather stripping installs into the window sash by pressing it into a slot in the sash. It ... (cont.)

Hi, I have a large old house with many older triple-track systems over the original wood windows. There are a number of missing storm windows. I'm looking to have someone remake them if possible. Attaching a picture of the corners. Is this something you can do? If so I can provide the sizes of the ... (cont.)

No #

Key lock

The broken one is original. The white one is willing to replace a couple years ago. Can you recommend the right part to repair it is thank you. Also, do you sell the little metal clips that hold the guide in place by you repair the window

I have 5 sets of triple casement windows which have a stationery center glass and left and right glass that crank open. I need to replace the right frame on one casement window and most of the seals on the other windows as they have become sticky. Can you let me know if I can purchase the glass and ... (cont.)

Glazing bead part number?

Hi, I am looking for a lock mechanism and receiver for an older pella designer series sliding door.

Looking for the wheels (2 sets) for PGT HS-510 Vinyl XO Horizontal Slider window. I have additional photos but was limited to 5 uploads.

I am looking for a handle to fit this door.

Am in need of several of this channel balance. 23" frame, 22CF is stamped on frame. Please see top and bottom attachment photos. Thank you! Jim

Need a replacement lock for a Pella storm door.

The plastic hinge for the locking mechanism broke. There are no markings on the handle or door, there is only a sticker on the door which is posted in the pictures.

I need replacement balance shoes, the top where the rope loops through cracked, allowing the rope to slip out. The window is a Pella Architect Series Jan 2005-Jan 2011 Double Hung. Part number on the window is PEL-0708-ASCDHV21Z3-045AD57AWHT-521S. The balance shoe is 1.7" tall, 0.6" wide, and 0.5 ... (cont.)

Looking for a sliding door locking plate per picture attached. The overall physical dimensions are: Width along door rail: 2 3/4 in High: Floor to door rail: 1 1/4 in With: section on top of door rail, 0.5 in Quantity: 2

I am needing a replacement latch for an older Kinco window. I saw a photo from another post showing a number 90-021 part that looks like the one I need with one exception. The part I need has a 1 1/4 inch placement between screw holes. Do you have the part I need?