Viewing all customer Discussions for:

Other

The roller at the bottom broke how do I remove this the screw?

Looking for this replacement part

Hi, I hoping to replace my crank window handles on my Milgard windows with a lower profile handle, such as a knob, so that my blinds will go straight down. Do you have a replacement part that would fit for me? Thank you, Fran

Length-32 5/8" Stamp 32 4. Photo Attached. Milgard windows Quantity-6

The thumb latches and tabs that hold the top of the lower tilt-in sash in the track when it is raised are broken. This allows the window to fall in when it is raised. Can these latches and tabs be replaced?

May you please provide a quote to match the uploaded photos.Shela

I am trying to replace the casement opener shown in the picture submitted. The main gear in the assembly is stripped. looks like the crank arm is 8 1/2 inches. Right hand crank (opens on left; hinged on right). Thanks for your help!Frank

I have an Inside Handle that is broken and I need a replacement. You can see in the photo where the latch is cracked at the pivot pin. It is similar to Model 40-150 except is has a lock. Do you have a version of the 40-150 Inside Handle that has a lock? Also, the Resilient Strike appears to be eith ... (cont.)

The one in the pics is 28inches overall and the metal is 27 inches long the metal is approximately 5/8 inch on all 3 sides. The plastic piece on the one end is approximately 1 3/32 wide. I will need 8 of these.I also need the same thing except the length is 21 inches on the metal and 22 inches over ... (cont.)

Hi,I am desperate looking for 8 of these to repair some windows. I would need 8 of them. The stamp on the side says 24CZ. Thanks Maria

I need this specific kind pivot lock 1 inch. I ordered 1 inch from SWISCO it does not fit.

Hi, I have slowly been losing these in my home and was wondering if you carried them Thanks, Ian

I am trying to figure out what these window parts for a Winstrom window are called? And is so do you have these parts available.

I'm looking for a interconnected single cylinder deadbolt, 6inch center bore to bore..

looking for kitchen window crank out arm old part # 06272001-1345

Hello, I have some alside windows that need their pivot bars and shoes replaced. Window specs: H-LC45 914x1981 (36x78) SERIES 0201 / A201 DOUBLE HUNG P.L.# 004-011 The pivot bar has a number on it. Thanks for your help!

We need a replacement balancer for these Jeld-Wen windows.The windows where installed earlier this year and Jeld-wen is having difficulty supplying replacement parts. Please let me know if you need more information. Thank youDan

When locked I can still pull the slider open. I believe the hook isnt fully secured when latched to the plate in the frame. I dont typically handle small jobs around the house but I think I can knock this out. I also gave you the serial number if the door.

I have the large post?and I have removed the insert but now the post is too long what can I do?

Balancer for a commercial non-tilt single hung window 5/8" diameter tube Thanks!