Viewing all customer Discussions for:

Other

Hi, thanks for reviewing, I need to identify the replacement parts for my windows. The constant spring on the right side has broken and I can't seem to figure out how to get the two plastic pieces that can contain the spring to move. I removed the lower spring, but the plastic piece does not slide. ... (cont.)

Left and right balancers for window. Markings on spring was a 4 and one was a 5. We also need 4 tilt clips. There where no numbers on clips to hold window in the frame. Both broke within a day. How do we pay for parts?

251/2 25 Ds 41

See attached photo of needed latch. Didn't see anything quite like this. I would appreciate your input. Many thanks. Tom

Can u help identify brand

Hello, From previous posts, it seems like sourcing this item may be possible as a custom order? Hoping for you assistance. I measured the metal interior length appears to be 31 5/8 inches long by 1/2 inches wide. The stamped markings show 31 5 B.S.I PM. Is this enough information for your ... (cont.)

Do you know where I can order 1 of these.

Good Morning, Do you have the available part or replacement for this window crankThank you in advance for your assistance Tom

I have 3 different sizes of Simonton vinyl windows I need to replace the broken balances. They have no markings on the coil springs. The first one has a top sash weight of 9.6 #'s and the bottom weight of 10.4 #'s . The second one has a top sash weight of 7 #'s and the bottom weight of 7.6 #'s. ... (cont.)

Hi, I'm trying to identify which roller is closest to mine. 81-138 looks extremely close, but the width is not quite right. Is this the best suited one? Thanks!

Good morning, I have a customer needing 4 of the following sliding screen door rollers, would you have this part?

27 1/2 3 E H

Looking for replacement seal for bottom of window.

Do you have this patio door roller?

I need this piece to repair my bi fold doors

Good Morning, In need of replacement channel balances. In speaking to customer service, it was determined that these will need to be custom. The length of the channel is 29" Width of the channel is roughly 5/8" The depth of the shoe is between 7/8" and 15/16" Stamp is 28C I will need (10) balances ... (cont.)

I have a Twinseal Single Hung P.L.# 264-019. The windowpane size is 36"H x 33"W. What balance and balance length would you recommend? And since they need to be replaced, are there other parts of the window you'd recommend replacing? Rob

Hi! I have 9 old windows (I believe they are originally from the early 1990s. That require all new channel balancers. I need to replace 18 channel balancers, but I would like to purchase 20 so I have an extra set. Provided are photos that hopefully help with identification. Note that the overal ... (cont.)

I need the striker plate for this type door handle it's an older Larson storm door with full glass Thank u

Window crank- corkscrew cartridge sheered off at tip won't connect with cogs- unable to close window ( can open) - is inner cartridge available?? ( old windows!!!) " TRUTH" made in USA