Viewing all customer Discussions for:

Other

Need white, kerf type hollow Bubble seal: the kerf and the bubble each measure 1/4 inch. Included ruler just in case. Thank you for your help. I might have to order a sample to make sure it fits.

These parts fell out of the window and now the window falls out of frame.

I have 2 certainteed single hung windows with bad window coil balancers. Sash sizes are 19" x 33" 30 1/2" x 44"

I believe I have a Duralite patio screen door. It is missing the black guide. On one corner. I am looking for a place to buy more of them?

We want to install a strong lock on our patio door, it is Silverline brand double mortise lock, we look exterior handle off and there are no punch out areas.

I am looking to find these two particular items for my windows. I have no additional information unfortunately as the windows were installed before I moved in and a window has the latches and handle missing - the photos are what is on the existing window as an example. Many thanks for whatever ass ... (cont.)

The aluminum frame measures 1/4 " x 1/2". I need the plastic corners that fit inside the aluminum frame. The plastic part that inserts into the frame is 19/64" x 13/64ths "

The mechanism to turn the lock appears loose and worn / broken. Question 1 would be can I replace just that part to fix the lock? Question 2 would be if so, what part would it be? Question 3: if not, what are the total part I would need for the full repair?

I ordered 18 large butterfly latches on 7/28/23 for my screen frames. The large butterfly latches fit into the screen frames and work but my concern is the latches don't fit snug and perfectly within the window frame because the tooth looking piece on the new lstch is a little longer than the origin ... (cont.)

Good day, my house built 1957 has aluminum awning Jalucion ,crank windows, right side crank operator Need 4 window operators Need 10 crank handles Need 6 hook locksNeed 6 hook locks studs baseWindow are stamped Trade Mark Auto lokPlease let me which part are the replacement on your website?Th ... (cont.)

I'm look for this pin specifically. I saw a similar one with a round tip but this has more of a hammerhead tip.

We have two windows that need new channel balances and side release clips for two of our windows. We have contacted a local window person that was going to come out 3 days ago and left messages but no one has called us back or shown up. Can you tell us where we can get these channel balances local ... (cont.)

Sliding glass patio door dates to 1966. Original rollers are all-steel and door weighs at least about 100lbs. Wheel outer diameter = 1.25" Wheel thickness = 0.3" Wheel bearing diameter = 0.6" Frame width appears to be 3/4" to 7/8" (not directly measured - see photo 05) Vertical distance from mounti ... (cont.)

Tilt Window Sash Pivot Pin, 2¹/²"

Looking for four screen corner assemblies. All four corners are stamped with #11347 and T/M (in a circle). The reverse of corners removed from the top of the frame are stamped with "1" while the bottom rollers are stamped with "2" and have the long steel spring attached. Looking to replace two ... (cont.)

The metal part alone is 20-1/2". The channel width is 1/2".

The left picture is the part I need- just the cover.

Thank you

Please see the pictures and if you could help finding the right one. It is a L shaped corner piece. Ted

Need a new sliding window for my window. 33.50" long 23.25" wide 1.25"thick It is a double pane vinyl window. I just need the sliding part of the window