Viewing all customer Discussions for:

Other

no pic

We cannot determine how tO remove this sash in order to have the thermopane section replaced. The white metal frame slides into side channels with no way of determining how to remove the sash--the upper and lower sashes are stacked over each other in the same channel. The label inside the window i ... (cont.)

I've ordered this part with the numbers 30830 and 30841L TWICE now, this will be the third time. Both times it took a week to get them only to have them be the wrong replacement part. It has 30830 on where the cork screw cover is and 30841L on the 2 piece arm (photos attached). I need 2 of these. My ... (cont.)

Hi! This had a metal tab with a hole in it that broke off. Plastic or nylon wheels go along a little ridge on the aluminum door track. Door originally installed in the 1960s we think! We didn't find any markings (the glass was replaced years ago so perhaps that was where the markings used to be) ... (cont.)

Not sure if this is correct crank

Hi I need 18" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance - Stamp 17-4 And 13" Caldwell Series 300 5/8" Channel Block & Tackle Window Balance - Stamp 12-2 Both with winged top and bottom guides 1 pairs of each please with total cost Thank you.

I need a replacement locking mechanism for a Paradigm double hung window- serial number 97354-005.

Our patio door is oversized. It's called a "Wisconsin" patio door, but has no markings for manufacturer.

Good morning, could you please inform me of the replacement parts for these items...Thank you

I am needing two Block and Tackle replacement for a EMCO storm door. I did not find any part numbers on the door or balancer other than the door is a EMCO and the balancer is 36 inches long as shown in the pics. Please let me know if you have replacements. Dave

These are 30" long with stamps of 2930 (smaller window) and 2950 (larger window) - based on your site it looks like either S380 or S385 to me. Appreciate any suggestions to get the right ones ordered. Thanks!

I have three of these windows, photos show two of them. The window latch and tilt-in latches need to be replaced. There is also some damage to the window frames, wondering if there's a way to fix the vinyl there. Lastly, at least one of them is missing a balancer - is it possible to find a replaceme ... (cont.)

I need some shoes for my windows, not sure which to get

1. Amerimax Windows & Doors which has apparently gone out of business. The Casement Model is 2600, 3/4*Dbl*AG27 AMX-K-9-00088-00001 Vinyl Frm Thank you for helping with this! I'll be uploading a few other broken latches that need to be replaced...

Hi, I have a pair of nightstands that needs new drawer glides. They were originally metal on wood glides, but two of the wood lights are worn out. I tried to replace them with new wood glides, but it didn't work out. the metal glide under the drawer is recessed. I'm wondering if this drawer glid ... (cont.)

Looking for price and availability for this part (see photos) See second photo for Crestline window markings

Hello,Please see the pictures with dimensions. I have a couple windows that need new pivot lock shoe tilt spring. Also the tilt latches as well. Do you sell any that will serve as a replacement part for either of these items ?Best Regards,Jake

This seal is used for a very small gap inside the window. See the attached pics. The overall height is 7/16 inches the bubble part is 2/16 inches and the flat part is 5/16, the foam is also at the flat part. Please help me to identify which weather stripping I need to buy. I checked 58-156 but the ... (cont.)

latch is wrong. bevel is wrong way

Looking for replacement handle.