Viewing all customer Discussions for:

Other

We have a Perma Door Steelcraft, front door that is in good condition but the gray plastic cap that covered the 36" threshold has cracked and the edge has come off in places which makes the door stick. We currently are holding it in place with tape. We have been looking for a replacement fot it. ... (cont.)

I have a 31" channel balance that I need to replace. I believe that it would be one of your Series 390 balances (S390-31). It has a 1 1/8" width bottom shoe. The only marking on it is 3016, I don't know which 30XX to order. The window measures 34 1/4" wide by 32 1/2" high. It weighs 25 pounds. ... (cont.)

Channel length 26 5/8" Channel width 9/16" stamped 26 3 The metal cord tension hook broke on one of the channel balances. Do we need to replace the entire balance?

See attached pics. I need a replacement handle. If I have to buy the whole set, including the outdoor part, that's OK, but I'd prefer just to replace the broken handle. If I have to get the whole set, I don't care if the key is different, we use electronic locks on the front door, so it's ok if this ... (cont.)

I'm looking for replacement weatherstripping for my Pella entry door. The sticker on the side says PELLA -040417 P0610700826 NFRC PEL-N-218. Detailed photos are attached. Thanks for your help!

The windows are original and they no longer stay up. No markings on and parts or the window.

This is 3 panel sliding glass door about 1976 model. 2 fixed panel on each side. The middle opens.ThanksRobert

I am looking for 5 sets of casement window hinges. The numbers on these hinges as shown are 30905 and 30744. My house is 30 years old so I am assuming that is the age of this hardware. Thank you very much for your help.

If you can determine which balancer is needed to match the letters and numbers in the photo, I would like to order two.

I think this matches Product Code: 82-265. The only markings on the door that I could find is the gold label in the photos. I don't know the manufacturer name, but it was bought from Lowes in 2013. Just wanted to verify before ordering. Thank you.

I'm replacing a coil balance spring in a nominal 36" X 36" vinyl, double-hung window. It is a dual-glazed, tempered, obscured glass bathroom window. I can't find a manufacturer's label anywhere. I've determined it is a S160 spring (1/2" wide with a short "T" tongue). There are no coil strength m ... (cont.)

I have more pictures if needed.

Length: 27 inches No stamp, but LH balance has 26 6 GV CMC 2 printed on it RH balance has 26 6 FV CMC 2 printed on it Milguard windows, original to house built in 2000 Need 1 LH and 1 Rh balance.

Length: 33 15/16 inches Stamp: 3365 (symbol) NX Milguard Windows, home built in 2000, original window 1 L and 1 R balance

Hi, looking for the replacement metal strike plate that fits inside the wooden astragal for our Atrium brand French doors. The metal locking strike plate does not have any markings/part numbers on it. I'm looking for the strike plate so the door will open on the right when inside, and left when out ... (cont.)

Hi. Part of the sill cover of my front door threshold cracked. L shaped. size is 1 3/4" x 1". Wood grained or other color OK too. Probably 1/8" or so thick. Thanks!Mike Have ordered from Swisco in the past and has gone great!

Looking to purchase 6 balances though I don't know model type and part number. Metal is 30 inches long. Window is 20 lbs.

I need 4 of the 22-4, and 2 of the 26-3. Please let me know what products I need to order.

Hi, I have a series 4100 Swisco door that I am trying to remove since the rollers are no longer working. I reviewed the video at https://www.swisco.com/videos/view81, but starting at :50, it mentions removing a metal plate, but my door does not seem to have that. In addition, at :57, it says to rem ... (cont.)

How do you know which one to get