Viewing all customer Discussions for:

Other

My Blum hinge is bent and need to replace it. 110 degrees. Part numbers are34.355-01.0. And 213.21,, 5/16

Hi, This part is proving difficult to find. Do you recognize it or can you offer a replacement part that will work? Thanks

Channel is 1/2" wide and metal length is 19 5/8". Stamp is 19 5 (see picture). Do not know window manufacturer. Would like to refresh two windows, so need four balancers.

This is a sliding glass door that was installed 10 years ago. The locking key female end broke apart inside. I need a replacement. Please see following pictures.

I am sure you'll help me to find it...

Good afternoon, can I purchase a window balance S765-22 with the wire attachment like the one in the photograph.

I have a Sears storm door (see photo) and need to replace the Emtek 322 lockset and handle. (see attached photos). it appears that your product 40-183 (see attached) is the right fit. Can you confirm and give me any advice? thanks David

I'm looking for replacement parts for Buchmin Sliding Mirrored closet doors. I need the track, channel, and a replacement roller? Here are some photos of the top track, bottom track, and the rollers. The first roller in the photo is missing a plastic cover. The doors themselves are 37 inches by 94 i ... (cont.)

I am looking for replacement drawer slide for the provided photo item. Also, individual rollers, if possible.

I need two of the roller assemblies for my Pella Series 10 Sliding Patio Door. I also need (ONE) of the track assemblies that the rollers assemblies roll on.The exact measurements on the assemblies are: Housing Thickness(width) 5/8" Housing Length 3 and 1/16" Housing Height

Need replacement rollers for guardian sliding glass door A1,TTIWED4891-1.792ISNA DERE9METYTEFAU8/10202CCG2

I purchased coil housing pivots 15-087, Jan 2022 at the time I didn't realize I needed the coils as well, I am finally ready to use them, the windows were purchased in 2010 from Home Depot, the tag reads; 23 3/4x57 1/4, 8501-2, 19982288*2*2*1.1 1, 19 15/16x 28 5.16, 08/18 SS LowE 3 Argon. they are v ... (cont.)

This is from our older Hurd bay window that's the left hand hardware and I need the hardware for the right hand casement. The casement sash is 24x58

I am trying to fix my casement window. The part I need is this short linkage that connects the window to the hinge. It has rusted out over the last thirty years. Can you help me ? - thanks, John

Hi! Attached are three photos of a glazing bead section, taken on a machinist scale for size reference. Local window installers have indicated this bead profile is no longer manufactured and claim replacement of the entire frame will be necessary.. would love to find a suitable bead replacement in ... (cont.)

Good Morning, I am looking for a pivot shoe and the clips to go with it for and older Harvey double hung window. I've attached a picture of both parts. Thank You

The sliding piece here broke and fell out of its slot. What would you recommend please?

I need two block and Tackle balances with standard bottom and top pieces without wings for a non-tilt sash window. Picture 6941 above shows a complete balance taken out of the window and underneath it is the spring that came out of the other balance when the cord broke. (The other pictures are to sh ... (cont.)

Do you have this? Need spring and top and botton caps

I need a couple of these pieces, in the photos one is broken the other is not. It's a metal window that opens from the bottom like an awning window.