Viewing all customer Discussions for:

Other

Hi, back in 2021 I purchased from you Product Code: 40-049. It's been working fine but yesterday I noticed the latch wasn't working. I took the entire mortise out and it looks like a screw and possibly a spring fell off inside the door. When I swung the door open, the latch went flying off. I attemp ... (cont.)

Hi, I am looking for this 24" channel balance .. very close to the 775 but the weight says 23HD and that is not an option. Any suggestions?

I need 6- 26-200 screw plugs and 12 feet of .060 " or 1.5 m/m cord for sash balancers.

I am looking for a part for an old pacer by-pass door purchased in 2004. It is the Nylon guide, part no. CF1 and center guide screw no. 6-14.

Hello. Looking for these two Lania window parts. Dimensions are: a: 1 7/16" L x 3/8" D x 1/8" Thickb: Spring: 1/2"L x 3/16"R with 1/4"R x 5/16"R plastic cap with flangeThank you,Steve

The only markings on it is: 33 4 BQ CALDWELL

Not positive what the part is called but it the part connected to spring that the pin on the side of sash goes into. The left side is sticking and the right side plastic has broken and part is separated from spring.

I'm needing the top roller assembly for my sliding closet door Please, can you help me?

this roller is from a Stanley mirrored closet door

Window world windows,possibly 15-20 years old. Window latch's, both L and R.

I am looking for a screen door tension roller. I believe the style is called arcadia. The nylon wheel is 1.25 inch, the clips are hooks rather than ears, and the width is only 5/16 of an inch. The width seems to be the biggest issue. A 3/8 inch wide arcadia style roller has to be forced into the ... (cont.)

need pella door replacement

Hello. I need a pivot lock shoe the only number on the part is 1 (only have half the piece because the other half broke off somewhere). Found a sticker on the window and here is all the info. 40404 6/25/2010 2CWhiteM SS Bottom 1N HS 0749598501001 WH 00 i7 PBDHWIV440.813x39.375 OR. I was wondering if ... (cont.)

I need a replacement for the STANLEY pivot and Guide wheel

Looking to replace the doors and require rollers for new door.

I believe this is my door roller model. It's not intuitive to remove/replace. I've watched several other roller videos and this is unique. I don't want ot force or spring the metal on the door and hope I can get some technical advice. I do have pictures of the wheels.

I am looking for the componets for a crank out window., The stamp on the back reads 6397P AMS

I need to replace weather stripping Contacted Pella they suggested your company The stripping appears to be hollow round vinyl I measured .205 It is probably is a little larger since is is out of shape It is soft to allow window bottom to compress it and seal to top window

Do you sell replacement windows? The sash on my windows is coming apart.

Locking mechanism for sliding patio door. Supposed to be Anderson.