Viewing all customer Discussions for:

Other

Would you have a part like this or similar that would lock the door? The hook has broken off.

I have a window labeled 52-2905-WHT 15329614 7 2. The long spring-loaded metal piece including the plastic piece that was attached needs to be replaced on both sides. I have someone that will install for me if I can get the parts.

Think it Window World but unsure. Need to replace and wondering if you all have this or a universal that could be used.

For bottom sash of tilt-inward vinyl replacement window Dimensions: Hole (screw) spacing: 1-7/16" Width: 1-7/16" Length: 2-7/8" I need the left and right side.

Looking for an ODL magnetic sliding blind controler cover.

Need one window channel balance replacement for left side of window Series 7030/78: F-R20-108x72; F-R20-96x60; F-R20-72x72

HAVE TO REPLACE DOOR ROLLERS ON 2 DOORS PIC 1 NEED TO REPLACE ALUMINUM WINDOW ROLLERS PIC 2 THERE IS NO NAME ON ANY PARTS

I just moved into a new house and the window came off the rails and we noticed that the plastic keeping the hook in place is broken. I want to make sure I buy the right replacement.

I found this window holder to be broken when I removed the window to replace the spiral cylinder. I did not see this part on the partslist so I am sending pictures hoping you can match the part I need.Thank you.Ron

What size aluminum framing do you use for window screen frames with your push pins?

Need 1 piece

Hi I find pella patio door handle set, I got a serial number Pella 061520 P0 611173499 NFRC PELN 230

Need the whole kit lock, lever handle strike plate

Weatherstripping.

Not sure which piece to order for replacement

I need this latch to unlock my window.

I am looking for the two latches to this window to keep it in the track. I am not sure of the make of the window.

I need a roller set for our sliding door, the reference on the item says "Delta 2103" Thanks

The sliding window latch pictured will no longer retract far enough to clear the keeper and allow the window to open. I am looking for the replacement part. I just ordered 90-323 but upon further review (and grabbing my glasses) the screw spacing measurement is not the same. I see no manufacturer ma ... (cont.)

The sashes for these balances are 24lbs 2oz. I would need 2 of them. I assume the sashes these would go to are around 20 to 25 lbs? I would need 2 complete assemblies