Viewing all customer Discussions for:

Other

Hi, Any way you could identify these clips for me?

I need about 8 springs

I am looking to order balances, Series 751 Channel Balances and the left and right TG pivots.

Photos show identification info on uppper & lower window frames

I need to replace some rollers on a sliding glass door where your rollers are attachedIt states code category 11 16 CFR part 1201. Indoor use onlyTested by Twining lab Long Beach, CAProject 78-5038/ date 4-13-78Mfg by monarch mirror door co incChatsworth, CAPlease let me know if you have replacement ... (cont.)

One of the things I notice is that they have a 1/4 round cover over the Spring location that I do not see on other windows the two side releases are shaped to Tilt latches-fit over that instead of straight. I would think your straight ones might also work if you did not have this particular one. No ... (cont.)

Looking to replace an Awning Operator - Copied the parts I used prevuously from a different company

Casement window crank assembly to replace what I believe is one made by Ashland (p/n C-1040-5A)

Length is 3 1/4 inches, 5/8 thick, and width is 1 3/4 " adjustable up to 2" . This part is for an 8' foot door. Thank you

Hi, I need 6 new cranks and 4 new hinges. Thank you, Are you able to identify these parts? I'm having a difficult time getting anyone out to look at them to make sure I order the correct parts. I need hinges ( I think for 2 windows and about 6 cranks for the other windows.

Kitchen cabinet drawer slide "Front Fixing Bracket" Part # 793.025 (.10.01) is printed on the device. From house built in 2005 Screws affix at an angle (appx 70 degreesd?) from the top of the device into the rear underside of the front of the drawer box. There is a green slide on the face of t ... (cont.)

I am looking for replacements for these Scheirich #PPW 093 brackets. Do you have any suggestions?

Please help me with the replacement of channel balance and top sash guide for Kinco double-hung window.The metal part of balance is 30"The 2 windows weigh 35 eachI would like a price to replace the balance and sashes

cant seem to locate these anywhere.

what seal do i need part number want both

Bottom edge seal. T strip looks to be about .187 Not seeing any one your site with the 90degree angle and the t slot on the correct side. Thanks for any help

The channel width is 1/2". There is a stamp 28D.

I have attached photos of 1. Door Inside, 2. Door edge, 3. Door outside, 4. Strike plate.Dimensions:1-8 5/8" x 1 5/8". 2 screws Inside2-10 7/8" x 5/8". 6 screws// 2 pieces, split at latch opening (latch broken) Door edge3-same as #1. No screws outside 4-8 1/2" x 2" . 3 screws strike plateThe bras ... (cont.)

Gear is skipping

The latching mechanism has a part number 45CL-02. No part number on the outside handle portion. Notice the locking ketch is in the up position not the down position like your part item number 82-008 which I ordered earlier and doesn't work due to ketch lock is in the downward position. I also need t ... (cont.)