Viewing all customer Discussions for:

Other

Hey friends, I recently ordered a set of channel balances to replace a set on a window with a broken balance. The replacement balances are fantastic and make the window slide with ease! Because we had such a great experience with our replacement balances, we want to swap the balances in the rest of ... (cont.)

Hi,We have a casement window with a dual arm operator that has worn out. It is difficult to tell what brand the window is. It has a logo with a letter "A" and two underscores. The crank portion of the dual operator arm has a code 1491-120 B. The long arm has code S-1491-160. The short arm has code ... (cont.)

Replacement for weather seal for Survivor windows installed around 1996

Mortice for an Andersen sliding glass door.

Purchased part #32-349 and wasn't long enough. The original parts are from Mepla.

Here are 4 pictures of my existing frame corners. Two, front and back, are from a damaged screen I have not disassembled. Two more, front and back, are from a screen I disassembled. These look like corners I have purchased in the past, only larger. Any help you can provide will be appreciated. ... (cont.)

Visible glass - 28 7/16" W, 19 15/16" H Numbers on Sash balancer - 11600-17 731 043 5/02

I need to replace two roller sets for my Marvin clad ultimate sliding door as they rusted in a flood. The model number on the door is NFR 269/270 and the catalog number was CN 5070.

Casement window controller. It opens but will not close

Looking for the seal that seals the two slinging doors when closed together

i bought a new house, and two windows need a spiral balance mechanism replacement. One balance mechnisem is completely missing. I measured the length between the upper scerw and the bottom sash and it is 17'. the second window got broken mechanism. and by the same method of measurement it is 24.5' ... (cont.)

hello, I am trying to figure out the correct non tilt block and tackle sash balance. the sash is 20x37 thank you for your help.

Help. I have 10 triple awning windows and most of the cranks are broken.

Looking for replacements for this: 1/2" wide spring 5.5lbs 39" travel, 62" length of coil spring

Window balance. Do you have these in stock? 31 5 KC CMC 2 Thank you!

I have a Standley dresser and some of the drawer glides are broken. Kenyon rite trak11. I'm not sure about the 11 Pat. Pending 8485 120 6116706 W6

Hello, Old house; new to us. We are hoping replacement of these rollers will do the trick. The wheels appear to be nylon and have these words on one side: SYRACUSE NY TORONTO, CANADA KILIAN. They seem to be 1.25" in diameter and 3/8" wide. The largest piece of the housing is 3 1/6 by 1 1/16 by 11/16 ... (cont.)

This is 2inches long and 3/8 thick for tilt window lock catch. Thank you

The stamp number id 2950. After the four digits, there are three letters printed at ninety degrees from the 2950 number. The letters are "BSI". Then there are two more letters . . . TT.

The string inside my window sash broke and I'm trying to figure out what to replace it with. Stamped in metal is 26 5. Also BSI and RM. The length is 27 inches. The channel width is 1/2 inch.