Viewing all customer Discussions for:

Other

For Jeld-Wen casement windows. Width is 9/16".

Door handle and internal parts for a CGI Series 7700 hurricane resistant single door. The invoice identifies the lock mechanism as a series 800 Lever. CGI does not accept direct to customer inquires and the dealer who installed these doors in 2018 is no longer in business.

These windows are vinyl replacement windows not really sure there are no markings on my parts that I removed. Thank you for all your help.

Dimensions: 1" x 1/2" Color: Terratone

Window tilts inward for cleaning, accidentally let go and the left side plastic piece snapped.

A nderson Window, dated 3-90 and has CIG-2 on the bottom right corner of each window section

I need to replace the screen door locking mechanism on my Pella door. The door number on the inside hinge is 100405 91006 9001.I think the part number is 305013 Dark brown, but I'm not sure that is correct. Any help? Thanks, Ken

Hi there, I've enclosed photos of the ends, as I would imagine they are critical. The unit is stamped with "27 C" and I measure the length at 28 inches (metal only- not including plastic ends), and the width appears to be closest to 5/8 inch. Could you guide me to a compatible type of balance? Than ... (cont.)

Hi! I'm in the process of buying a home, and I noticed that a couple of the casement windows had cranks missing. In searching the internet, I came across your website. I could not find an identifying brand on the windows, but I did see the above markings etched on the glass. Hopefully, that is s ... (cont.)

These are the springs which work well. I am trying to identify what they lock into on the bottom pane. The window balance?Looks like a plastic piece the spring latches onto..couldn't get close to get a picture. I could remove the window if neededPaul

Its the bottom part that enables door to open and close. Any help would be appreciated. Thank you

I am looking for new wheel cartridges 4 of them these doors weight of the door is about 200 lbs it has an aluminum wedge with teeth sliding by pinion gear in wheel cartridges

26-3 stamped on side Metal channel measures 27"

We are needing window cranks, but unsure of what parts or crank handles we need

I am looking for 8109 double hung 48"X 48", Coil Balance Pivot Shoe Weather (Shield Window)

I need replacement rollers or assembly for a Pella slider screen. The assembly is attached to the frame with 3 machine screws. 36" in overall length or I'll take 2 of the 1" diameter rollers. Thanks Much, Bob

I think it T slide 1/4 drop foam filled bubble seal

Hi there, I'm looking for a more secure replacement for this locking mechanism. I saw some mortise lock replacements when seem like they would definitely be much more secure but not sure if any would fit my existing door. Would appreciate help identifying any that would work. Thanks, Sonny ... (cont.)

I've attached 3 photos; can you recommend a replacement Part, to secure our Screen (and Glass during the Winter)?

I need 4 of these: Stamp 32 5 (unsure of manufacturer) metal channel is 32.5 inches roller in bottom. See photos Also need 4 of these: Stamp is 26 4 with all the same above. Please let me know. Windows on 2nd floor almost fell out.