Viewing all customer Discussions for:

Other

Looking for bubble window weather stripping. Foam core has broken down in almost all windows after 20 years. Slides into channel in window with the plastic "T" . Looks to be 5/8" wide overall. The foam cylinder portion maybe 5/16" and the overall thickness maybe 3/8". Photos attached with ruler ... (cont.)

Trying to locate T spline for storm door. Top of T is approx 1/8 and bottom 1/16 ( part that goes into slot on door frame and hold screen)

1) channel length = 30.5 inch Channel width = 0.5 inch 2) 30 3 BS1 OR (photo is attached) 3) Don't know the manufacturer 4) It is for non-tilt windows 5) Need 4 parts Thank you

Unknown shower type hanging semicircular door bottom guide. Do you have an option? THanks

At the bottom of the combination window is a little slide thing on each side corner of the bottom of the window which you push to the side to move a small post at the end of the slide which allows you to then remove the window. It is about 3 1/4 long. It is all one piece. I've bought corner pieces ... (cont.)

I need a replacement latch mechanism for my Pella storm door, registration number 90564.331691201. Can you help me? Thank you.

Hi im trying to find this part for my window this are pictures and i have find something similar but not sure will tat fit

Metal channel is 32&9/16 Stamp is 3240 Pella manufacture n/a 2 balances It also had a piece fall out. googling around it appears to be a "Stepped Sash Guide, Alpine" I checked this one against the one on your site and measurements line up. I don't however for the life of me know where it goes. I'd ... (cont.)

How to measure window to get the right balance. How long should it be . It's the 351 balances but not if length is tight

My son was mowing and ran over a rock well it flew out and hit the top window and broke only the outer pane. How do I remove the broken glass safely

Metal channel length- 16.5" Stamp - 16.2 PR Manufacturer - ??? How many needed - 2

Missing thumb screw from Viking window

Top fitting and bottom fitting metal hook. Channel length is 13 5/8". stamp on medal rode says "13.9" Stamp on rod says 3.S.1 RJ

Hello. I have a casement window, barn door style. One side is missing the rail that pushes and pulls the operator arm to open and close the window. Arm numbers and inscription includes Truth 30818 Entry Guard

Looking to ID this part as one of the other clips was lost during remodel

Hi - I am looking for replacement weatherstrips for a Pella Exterior Door Threshold. I need three of them at 36" width. A photo showing the profile is attached.

Bottom profile track assembly

Looks like I have the same problem. How can I order a left and right coil spring and housing for my tilt windows with double springs. Thanks. Corry

Need help finding these window track pins

Please help identify where I can buy this screen lock part.