Viewing all customer Discussions for:

Other

my window not staying up any more MI WIDOWS& DOORS 26422164.1 3500

Hello, I need help identifying this weatherstripping. It goes on the outside of my casement crank windows. Thanks in advance for your help. Susan

Hello to whom it may concern , I'm looking for a replacement screen door latch as I have a Ace Hardware temporary door latch to keep door locked until I get the correct part. Please and thanks

I need to replace our window balance on a couple of our windows. There is FT B 1 printed on the round tube, and it is 29" long. I attached some pictures. I believe the windows were installed in 2000 or 1999. Any help would be appreciated. Kevin

Can you tell me if y'all have these valances in stock? These windows are 2860 the windows are bronze aluminum.

2330

Hello. The original spring says 35. I don't know which one exactly.

Please see the attached photos. The length of the channel balance is 31 11/16th inches and the width is 1/2 inch wide. The window was made by Insulate Windows out of Kent/Auburn, Washington approximately in 2004. I would need 2 channel balances as replacements.

2370 bsi channel BalanceShow broken pictures of good one to help identify these appear to be one piece modeling to hold pulleys If possible to replace the foot and pulley part the rest seem okay.

Hello, I have 10 double hung tilt windows in my house since 23 years ago. But we've always had the problem of them sliding down by themselves after some years. I think the problem is that the windows are 33lb each (15kg) and the spiral balance are red-coded. I've been thinking about changing them t ... (cont.)

Window does not crank open or closed and window holder on bottom of window is off so window just pushed out at bottom . Also inside crank cover inside is 4 inches

Pacesetter windows, one side of pivot shoe lock is broken. I think it appears to look like your part #15-177. Please advise. Thank you!

I was hoping you could help me identify the parts I would need to fix my windows. I have included some pics to see what I am Dealing with. They at 34" long. Not sure how they fit together as all the windows seem to be broke. Thanks for any help!

I am looking for the glazing bead for my Likit solid window. I've noticed that the bead has separated from each other at the 90% corners. Do you think it is possible to take it off and restretch? I don't think so so I need to order new and replace all four sides

My window will not stay up. I need the side holding devices. Pictures are attached

I cannot find a replacement for the side jamb. It is bent.

Hello I have to replace Snap-In+Latch Brand : Sheffield windows Snap-In+Latch PART # 11 B,11 C,11,11F I need 10 right hand and 10 left hand. Thank you

I wanted to get this bottom part of the window. I attached 4 pictures. The first 3 are from a different window showing the piece we need and the last one is the window with the missing piece. The window is 14.5 wide

I am looking for replacement locking tabs for these windows

Acorn sliding glass door top lock plunger