Viewing all customer Discussions for:

Other

Hi, Have rear patio sliding door - would like to have a lock with key for emergency use only. Screw holes are 6 9/16" apart. Door thickness as per photo Do you have such a device? Thanks, Graham

I have pre 1995 pella wooden casement window which i have already replaced the original pull down screen with a newer style rolscreen about 10 years ago. I am in need of about 5 of these guides which go inside the screen guides. See photo below. Thanks, Bob

I need the attached 2 5/8" long x 11/16" Wide

Hello, I am trying to identify my roller for my sliding glass door and get a replacement. I submitted the form in identify a part and said it went to spam so I am reaching out to see if there is a way I?ll be able to get an answer. Thank you so much for the help. Let me know if another angle might ... (cont.)

I need a 110 degree hinge for frameless cabinet. The diameter of the hole in the back of the door that the hinge sits in is 1" The distance between the edge of the door and the beginning of the hole is 3/16". The screw hole spacing on the back of the door, center to center, is 1.5". The hinge I ha ... (cont.)

Need to replace Pella Proline Casement handle hardware, 7 of them

Hi! We had our window repaired and during the process found out most of our tilt latches in the house were broken. My husband just went to install the new ones and realized they were too small and there s these divets on the size which doesn't allow them to slide into the groove in the window. Pleas ... (cont.)

I need help identifying replacement rollers.

Window is approximately 24" high by 52" wide. It opens/closes up and down. I need to know the price and model for each channel balance piece.Markings on the metal say,23DS rh38Thank you,Ana

I have searched everywhere for these. they came off vinyl sash windows (lower sash) and I have no idea who made the windows.

I'm needing a set of these. There's no identifiers on the window they brought in...

I am trying to find replacement weather stripping for SEMCO windows.

Hello, I have a window that needs to pivot bars. It will not stay open and when I compared it to the sister window, I could see that is what is missing.

NEED A BOTTOM DOOR SEAL AND ALSO THE SEAL THATS GOES AROUND FRAME THAT GOES AGAINST THE DOOR. MAKE OF DOOR IS CELCO PLUS 32 BY 80 9LITE INSULATED BOTTOM SEAL IS BROWN AND OTHER SEAL IS WHITE.

looking for a left hand slide bolt for a storm panel. Do not know brand of system. it has a cavity on bottom for the spring and nylon keeper, with a lock pin 3/4" long. Let me know if more info or pictures are needed.

need 2 window balance replacements 27" long. I'm not sure if all five pictures uploaded. part number stamped on window balance is 2640P and looked just like the one in the video.

Cannot find this crank. Any help would be appreciated.

I am looking for a sliding mirror door top roller guide and a bottom roller guide for a Monarch Stanley. I think I located the top roller guide here: swisco.com/top-roller-guide/pd/Sliding-Closet-Door-Rollers_Guides/23-222B. Is this correct? Thank you!

Looking for this window mechanism. The window is a Marvin awning about 44" X 16", with a glass date of 2001. Stamped on the bottem is "Truth #45002". I would prefer a white operator cover and also would need a white crank. Will take what color is available. Thanks for your help.

Do you have the plastic corners shown in the picture. I purchased what I thought to be the metal replacement but my window guy says these metal 95-191 corners won't work/fit. (They appear to fit imo). But nevertheless do you have the plastic version or know where I can order them? ... (cont.)