Viewing all customer Discussions for:

Other

I'm trying to replace the screen on this older sliding screen door. (I don't know manufacturer.) It appears to be riveted on, so I'm not sure how to remove and either reinstall (functions fine) or replace with similar part if needed. Also, to my untrained eye, it appears like the rivets go the entir ... (cont.)

I cannot find a replacement for my bent striker plate. Hard to read the info on the door. This is what I see. Guardian SC SOCC 1630 1/8UA 19 CFA 1201 11 It's very blurry so some if that may be wrong. I'll add a picture. It's 9.5 inches long.

Hello, missing a piece on an awning style torque bar window. In the picture where the arrow points I am missing that bracket which causes the window not to be able to close. Picture is of another window which has the bracket.

Hoping you can identify the clips I need to replace the other broken clips which hold the screens in place

GLASS STOP 5/8H X 7/8W

Hello, please see the attached pictures, I need replacements for these parts. The upper coil housing has two coils in it and has '11' marked on it. If you have these parts, please let me know the price and availability. Also, do you also sell the seals for these windows? They are of the "T" type, wi ... (cont.)

Hi. I have old screens which keep on falling off the window when wind starts up. My other windows have a screen frame which falls flush to the window and the screen clips hold it together securely. Do you offer the updated frames? If not, how do you call the frames with the flush area? ... (cont.)

Please price almond color snap bead face about 1" wide with 1/4" lip would need about 16 stock lengths Thank you Mike Amsbury Rivercity Glass

Need window valances for 1997 Kinco windows. Stamped "29 4 IQ CALDWELL", see.picsThanksJohn

I am looking for this glazing bead, unsure of manufacturer

I am looking for a replacement lock on my Jen weld white slider after Hurricane Ian corroded my current lock. Any Ideas! Thanks

My technician ran into a tilt pin/sash pivot bar per the attached picture. This was reputedly from a 1995 Windsor Aluminum Clad Double Hung window. Can you identify the pin and what it is from and/or a replacement?

Looks like a spring loaded tab that slides into the rail. Both little tabs are broken and the top half of the window is leaning towards the inside.

Hello, I need 6 of the specific item. It is a window crank. I need 6 rights and 6 lefts

Hello! I just received part # 15-195B. I thought it was the correct replacement for what I have. However, I received the parts today and it appears the rectangular cut-out in the metal part (hole for the pivot bars) is smaller than the hole in the T-Locks I'm replacing. Is there another part tha ... (cont.)

Hello! I'm trying to replace a broken one of the attached item but it seems that there are MANY kinds! Can you help? They are 1-1/4" wide. Knowing that they break easily, and all of my windows are 15 years old, I'll probably buy a bunch and keep them handy to save shipping. Sincerely, Brad in Ch ... (cont.)

The dimensions are : 2.5 inches in length 0.5 inches in depth (little past 0.5 inches ) 0.5 inches in width (little past 0.5 inches)

Wheel broke off from crank arm per picture

Would you kindly look at the attached images and let me know if you have this glazing bead in terratone. I think this is a 400 casement window for late 80's -90's

I need tilt latches for my Andersen Silverline single hung windows. Photos attached show the latches I need along with a window identification tag. I need these in the beige color. Thanks for your help!