Viewing all customer Discussions for:

Other

Mirror sliding door hardware assembly needed

Hi I'm going to replace all the balances and tilt latches in my windows. I've added pics of the latches with measurements visible, hopefully that gives you what you need. For the balances, they are 28" long and 3/8" diameter. The sashes weigh 18 lbs. The original tips are all broken off or missing. ... (cont.)

I don't know what it's called but this holds the end of an arm that penetrates the window frame. The arm has a "pin" at the end that act as a pivot point , you can see how the part has a space for that I need two of them.

Hi, thankfully I was able to identify that it was your company that made this due to the stamp. I would like to order a replacement. the 3 photos attached are what are at the ends as well as the stamp. The plastic from the top of the pulley system is broken and the pin that held the very strong s ... (cont.)

Looking for a new latch for this door. The inside of the mechanism is broken.

Hi - the track cover was cut to install a dog door that is no longer there. I cannot locate any manufacturer information anywhere on the door. The track cover is 1" wide and just friction fits in the slot. Any help would be greatly appreciated!

this is a plastic tilt window latch.it measurers 2 13/16th inches from end to end excluding the sliding catch. the width is a hair short of 3/4 inch. photo attached

I need 4 pieces -- 24 inch

I need 2 hinges Ferrari B324 , I cannot find them in Canada can you help me Thanks

holds coil in track

At least 30 years old. I think the manufacturer is Viking but I am not positive. No part numbers or identifiers on any surface. 2 9/16 inch hole spacing. Appears to be very close to your part number 83-040.

Need a hinder for Harvey window bought back in 2001. Can you help me with this.

My window sash stops vary in length depending on window size. I am in the process of replacing window block and tackle balance which I purchased from Swisco. The size of stop for this opening is 1.5" length x 1.12" channel width. I plan on replacing all block and tackle balances and stops in the nea ... (cont.)

Need the crank mechanisms

Aloha, have purchased from you before and you have shipped to me in Hawaii. I have a client that has 12 doors with a 1/8" x 5/16" kerf in a number of exterior doors in a house built 20 years ago and and all 12 need replacing. I am looking for a replacement that is similar to what you see in ... (cont.)

Window balance plastic piece on rod end has broken through and will not hold spring tight. I cannot find a matching window balance anywhere. Not sure if a spiral balance will work or not. Any idea what kind of balance this is? Thank you

Nylon slide latch for storm window. Would prefer a metal substitute if available. Have a need for 3 left-handed and 3 right-handed.

Channel length is 28.5. Stamp is 28 5 B.S.I. RE Not sure who made the window installation is 2006 I will need 4 balances please.

need two different balances they have no markings on them

Trying to find a replcement for two rollers for my pation door. There is no visable identifacation on this part or the door.