Viewing all customer Discussions for:

Other

Need a new internal locking mechanism, as well as handle for the door described above. One attached picture includes details on door specifics.

Fasco door lock part number 202009

I seeking to replace a latch for my vinyl window

I have not removed the pin from the window sash so am not sure of it's length. The window is in a vacation home so I did not want to take it apart unless necessary. We will be there later this week so let me know if you need more details to identify the part.Also, the piece that fits across the bott ... (cont.)

I need to order new balances. As you can see in the pics the metal portion is 28" but the plastic tip has broken off. Should I order 28 or 29 inch spirals? Will my existing white sleeves fit over your balances? Window sash is 13lb so I assume the red tip is the correct part to order? Thanks for ... (cont.)

(No content.)

I am looking to replace several pivot parts on my sellmore double hung windows. The round metal part that pivots has cracked on several of my windows.

need storm door parts for an Emco doorLocking door handle assembly. I think Swisco part 40-049 will work. Prefer black hardware if available

I believe this is a cover for the outside plate that the roller is attached to. There is a similar cover on the other side of the door.

Good morning, I was told by a representative to sent pictures to see if you have the pins for the bottom of the door. It's a 26 inch door. Thank you

WE purchaseed an old home several years ago and the windows have been replaced with vinyl windows. SEveral windows have broken sash pivots, see photos. The pivots appera to be the same for left and right sides. The pivots are approx. 2.5" with 2-holes that are approx. 0.75" apart.The pivot off se ... (cont.)

Hi, I would like to replace Certainteed windows weather strip. Can you please help me to find the correct part? Attached are the images of current weather strip Let me know your best price.

Hello Folks, Are you able to supply this PeachTree Door weather stripping? Would you be able to supply me some of this exterior door weather stripping? Thanks,

My windows are from 1966 Sashes move in a plastic track with plastic tubes (all plastic brittle and cracking), metal springs and plastic treaded spiral balancers. Most springs have detached from their sashes so windows require propping. I want to replace with modern spiral balance. The window frame ... (cont.)

One of my listings has a broken handle on a very old sliding glass door. Probably installed in the 60's or 70's? Is there any way this handle can be replaced? If so, where can I buy one? Please see the attached photos. In the new attached photos, I've included photos with the measurements. The leng ... (cont.)

Good Morning Please see my image. These are Jeld Wen Windows. We do have the ID for the window also if needed.

This is the handle for our sliding door. The other side has a thumb twist which turns 2 times to lock. The actual grasping and locking mechanism is inside the sliding door itself and grabs pins on the door frame. Would you be able to identify a replacement? I can provide more pictures and exact ... (cont.)

Hi, I am attaching pictures of window sashes assembly, notice the metal pin on each corner of the window sashes has a round metal head, which requires wider opening on the pivot shoe metal brake slide-in notch? The window sash weigh 8.4 lb. Please let me know what type of coil balances I should bu ... (cont.)

I need to replace the pictured parts, Stanley 17-4116 (top) and 4011. Based on posts on your site, I need 23-222C and 23-041. Is this correct? Thank you for your time, Mark

Hello. I recently replaced my sash balances with S351's and they are working great - except for one window. When I went to install, I noticed that the little plastic piece in the top corners of the lower sash were broken or missing, so there is nothing for the top of the balance to fit into. The t ... (cont.)