Viewing all customer Discussions for:

Other

Can you provide assistance with determining what the correct part number will be for replacing the balance rod in the attached picture? The length of the rod is 30 inches.

Trying to get replacement tilt sash pivot bar for a very old (30 years approx) window aluminum double hung that has no identifying information. It looks very much like your part 26-226 but its single screw hole is just inside 2 inches from the outside of the pin. Number 9749 is stamped on it. The ... (cont.)

Looking for a vinyl or pvc L shape strip with t molding graber L measures approx 1/4" x 5/8 with an offset push molding

I cannot find any manufacturers markings on this door or frame. Do you have a replacement sweep like this, or know what brand of door this might be? It screws into the bottom Thank you

Attached is a photo of my current broken shoe for my window. My coil has a 4085 stamped on it. Could you help me determine which replacement parts I need? I know I need new shoes for both sides along with coils and pivot bars. However, I am not sure which ones to order. Thank you,Joe ... (cont.)

The face mount keeper displayed is slightly bent and the top crossbar has been broken off. This lock assembly is for a double hung vinyl replacement window. The number visible on the back of the face mount keeper is 4059. The number on the latch appears to be 4658-6.

I have a side entry garage door. The upper edge of the sliding window had a tab that held it in frame so it could slide. It has broken off and I would like to find a replacement window or part. The movable portion of the window is 19.25 wide by 12 inches tall.

Estimate lower sash weighs max of ten lbs marking on upper coil support says #4=5 I think it may be double coil. I need the complete balance set for each side

All I need is the latch assembly in my Larson storm door. The handle and mounting hardware are new. The number on the latch is 20GM.Can you help me out?

Hello, I am wondering if this is a swisco part? I dont see any other ID #s or brands. If it is discontinued what would be the closest match? Thanks

Hi there, We are looking to obtain pricing on three hinge items They have a specific angle, so we will likely need to send samples. This is one of three types of door hinges we need. Please also include lead time and shipping costs

Please find attached pictures of my broken latch. It is the 2nd picture and it is the right side of the window as looking from the inside of the house. Jeldwen Windows There is a tag on the frame of the window and it has these part numbers on it: H-R25-48x77 & H-R40 ? 42 x 60

Unfortunately the part that I need were thrown away, I can't send you a picture. The patio door handle read "international "

trying to locate a source for this glazing bead.. thanks

This door is about 8 years old and the internal locking parts that attach to the handle are broken.we need replacment part.

Need the 2 clear acrylic brackets that hold the straight metal towel bar onto the shower door.

Hi, I have three 1970s metal bifold closet doors that I'm hoping to find replacement parts for. I removed the doors to have my floors replaced and many of the parts have been broken or misplaced. I'm hoping to find replacement pins, brackets, clamps, bumpers, tracks, and anything else needed to com ... (cont.)

Hello, need to know if this window and be repaired or does it have to be replaced? Thank you!

Window Balancer

My client is in need of the multi-point latch assay. Unfortunately this is the only pic I have at the present time. It is a vinyl slider that was purchased at Lowe's. I can get more pics as well as measurements at a latter date. Thanks for any insight!