Viewing all customer Discussions for:

Other

Need to replace two or three sides of the glazing on a window but I don't know brand of windows or which part to order

Was wondering if you could identify this hardware. The door handle snapped off on the outside and needs to be replaced.

The spring unit is 29 inches long will need 2 of these

sliding door roller d1892 you can call me, my name is terry

Hello, I need three operator arms for two of my windows, mark: truth #30905, one right and two left and I don't seem to find where to order them for me to install them myself. Maybe you can help... I think the color might be a dark gold or green ...?

Slide lock with post that goes into felt slide in vinyl window

I only see a number on the silver pieces. It says 2630

I'm completing a rehab with a Weathershield casement window that was donated and have nothing to compare it to. Please look at the attached photos, specifically at the lock handle. It appears as if I'm missing some type of insert to cover the kerf cut into the frame that allows the locking handle to ... (cont.)

3/4" width, 1 1/16" height, 1 1/4" wheel diameter. Wheel is metal

- Length is 33 3/4 - Stamp is 33 5 BSI - I don't know who the manufacturer is or when it was made. The only thing I found on the window was the sticker that I included with the uploads - Count = 8

I need to replace this with a keyed lockset. Facing the door from outside the handles are on the left. Thank you for any help you can provide.

I could not find a match for our L-shaped pivot bar (see uploaded photo of an unbroken one). The closest is 26-402 where the length is 1.25 in rather than 1.50 in. Installing that with the given screw holes would put the window higher by 0.25 in and prevent locking. Making new screw holes in the win ... (cont.)

Can you please let me know if you have this replaced part shown in the attached pictures for my window. It's the pivot piece that screws into the window frame and slips into the slide mechanisms. I would like to purchase 6 of these because they are breaking, if there is a better quality part pleas ... (cont.)

Please see attached top, back and side photos. Unit housing width = 3/4 in. Unit housing height = 1 11/16. Wheel diameter = 1 11/16. Wheel Material is nylon. Units are attached to glass door bottom aluminum rail with drift pins. Note that the end view shows the top phillips head bolt must be the adj ... (cont.)

Looking for this glass stop - width is approx. 15/16".

I'm looking for a keyed sliding glass door handle with a double mortise. Can't seem to find one. Mounting screws are 3 15/16 and overall is 10 inches manufacture is PGT winguard slider. Thanks in advance. Tim

This popped out of our window during a storm and i need two more and I am trying to find out what is called and where I can purchase them.

It is a bifold door adjustable floor plate, I am just wondering if you have any available in stock. Please let me know what the product number for that part is. Thank you so much.

The one I have also has a mounting hole - is there an option for that? Over all length of the insert portion is 3-1/8 all other measurements match the 26-404

Folks, Just the lock seems to be broken but I can't figure out which part to buy. thanks - markt