Viewing all customer Discussions for:

Other

Dear Sirs,My pictures show the outside Handle for which I'm looking for a suitable Cylinder.It kind of looks like your Model "Product Code: 82-030", but what throws me off is, that in the outside-handle there is NOT like on the Product Page 82-030 https://www.swisco.com/Sliding-Patio-Set/pd/Patio-Gl ... (cont.)

Would like to change these two parts out to white. Having the windows painted and need to change these out to white. Help!

I have Milgard windows throughout the house. I believe they're between 8 to 10 years old. I need a replacement upper casement operator for my Milgard window could you please let me know what I should order. SERIES: 3510 casementPRODUCT LINE # 232-167Please see photos below.Thank you, Dan ... (cont.)

I don't known name of pivot shoe, I did send three pictures to you, but I would like to discuss with someone that can help me to fix problems

This Looks Like the closes one. 5/8" wide 1 1/8" high and 2 1/16" long. Crossly Door Roller Assembly Product Code: 81-001

Looking for the plastic clips see pictures.

I have Sunshine Mirror bi-fold closet doors, about 11 7/16th" panels (2) and one has the top pivot pin with the roller guide broken off of it. Do you have a replacement for it. Would order a couple or more. See attached photos.

my mortise lock is apparently too different from yours. Do you have a lock that ill put my door back in service?

I'm looking for this part. I can't find a manufacturer anywhere on my windows. Please help. Thank you.

Our house was built in 1978. this is for our cabinets in our kitchen. looking to get a few new ones for cabinets added. they are 5" long, the know is 1" diameter. any idea where i can obtain 6 of these. thanks

Hello,I need to replace the wheel truck on my ReliaBilt sliding glass door. The outboard bearing of one side is shot and my door sounds like there is gravel in the track, but it is perfectly clean.Width: 3/4"Height: 1 1/8"Wheel dimension: 1 1/8"Thank you,Nathaniel

I need help identifying the metal track measuring 10" long that attaches to the bottom of the windows frame. I also need the part that attaches to the bottom of the window that slides on the track measuring 2 3/4" long. Both parts appear to measure 3/4" in width. Thanks in advance for your help! ... (cont.)

Hi, I'm looking for a sash guide for my impact windows and I'm not sure where to go. You seem to have a large assortment of these types of products, but I did not find one that I need. Attached are images of what I'm looking for. I am not sure what brand my windows are, they came with the propert ... (cont.)

Good Morning, Please see enclosed photos. I need 4 clips and 4 of the post things that fit into the glide mechanism.

I have rusted out hardware on my single awning windows. I have added pictures of the parts we removed. There are 2 locks per window, with the white levers. There is one hexagonal metal piece with a handle that opens the window. And there is a separate metal unit I placed next to the locking mechanis ... (cont.)

24" METAL CHANNEL STAMPED 23 2 MILLGUARD MFG NEED 2

Hi, The screen is 31x74 and 1/8th. The screen is 5/16th thick. I don't know what else you need. I hope this is enough.

the handle itself has 8" thread hole spread. The mounting plate is about 4" This is for exterior side of door. Handle is on left side.

Hello. Need a pivot bar and balance. Left side pivot bar if you're looking at window from inside house Right side balance if you're looking at window from inside house. Balance says 37C.

Looks like its 15-194, but just wanted to be correct before I ordered. Let me know if I can provide any other information. Thanks