Viewing all customer Discussions for:

Other

Is a part for a mirror by fold door

Need: 2 - springs Number on part and photo 1. SA336 2 - springs Number on part and photo 2. LA406 2 - glides springs attach to. Number on part photo 3 A1-87558

I need a pair of channel balances for a Gapco window. See photos. Metal part of balance is 30" long. Mark on the back shows: d 2940

Hi,Need help replacing a broken casting on the above door (about 40 yrs old).I have attache photos of the assembly broken and assembled.If you can help please contact me at:Mike

Hello, I am looking for the correct balance hardware for these MI Homemaker II windows that were manufactured in 2009. The window size is 29 1/2 x 53 3/4.

I need the inside latch for a pella screen door

Hi, The attached photos are from the top rail of a sliding glass door. I believe the door was a DIY effort from 30 or so years ago. It's holding together well except for the weather stripping. I hope you can advise me on what I've got here. Thanks. Jim

measurement between the installation holes is 5inches apart

When i close the window the bottom hits window

These are from a window marked Malta 7A8 The strings come down and connect to these, and one part sits on some kind of pin.

Corners for window and window latch

Hello, We are looking for the exact replacement for these hinges. The markings on the hinges are below. A5 Pat 1967 pat 3.391.420.us

Hello I need to replace window sash . It's 29" long and 1/2" wide. I found part on your website but wasn't sure about the end guider . Can you please let me know what I need to order? I need 4 count.Thanks Prakash P

I'm not sure which crank would work best. I would like to order 3 new ones. Thanks, Jeff

I can not find these pocket door handles any where. They are from a Heritage multi-sliding door. Thanks for trying to help.

I am inquiring about changing the hinge/ pivot point to allow the window opening to be larger. Bishop

Hi. I have reviewed your CB parts and believe the S795-36 to be the correct part based on the 2 pictures I have attached. Could you please confirm this is the correct part? https://www.swisco.com/36-inch-series-795-sash-support-system/pd/Series-795-Channel-Balances/S795-36

Folks, you will see in the photos, I have had a coil return fail on a Simonton window. If you could help me identify the parts I need to repair, it would be greatly appreciated! Thank you so much.

Windows are Peachtree manufactured around 1992 time frame. I am trying to find replacement for these. Thanks, Matt

Hello Please see the attached pictures with a window roller we are trying to match up. Please let me know if you carry this part. Thank you