Viewing all customer Discussions for:

Other

Looking for price and availability on 50-S600-22 Window Ballasts and also a Tool. Thanks Wayne

Hello, could you help me find the spring for this window, please?

I have several Alside model 0601 double hung windows with damaged tilt latches. These were installed around 2010. I am looking for replacements.The dimensions are length = 2 5/8 in and width = 11/16 in. Parts 26-243A and 26-244B might work, but the edge of the latch is a little different. ... (cont.)

Does the 39-114L handle fit onto a 39-172 operator?

HI, We have these wooden casement windows in our Sanctuary. Can you identify the operator from this picture? I believe it's a 9.5" arm. we want the whole operator. This is a working window, we have some that are not working and need this exact piece to be replaced. I am not sure if its right or left ... (cont.)

Hi. I am looking to replace the weatherstripping for 2 Pella French Doors, installed in 1999. I need both the weatherstripping and the 90 degree corners. I need help identifying the part number. Thanks

I have a window balance that broke. It's printed with "26 4 DX CMC 11". I don't know it's series nunber

LOOKING FOR 2 LH AND 2 RH 31858 IS THE # ON THE ARM

Hi - I need sash balance replacements for an Andersen window. number stamped in the lower right corner is; CC-4 2-00.7

i believe the part# is: GUARDIAN CARLETON, MICH ANSI Z97.1-1984 SAFETY TEMPERED SGCC 933/ I/8U it was a little difficult to read as the tag was old and faded and backwards... hopefully we can find a replacement that would fit

My windows baloancers dont hold, string balancers are broken. Mod# K7 827 1-88. I wasnt able to find an exact match at your site, please recommend the repalcement, 3 windows, both L and R balancers, pics atatched.

Buy

Imprinted number 2930 on rail

I am looking for the correct Andersen Sash balance part number to order.

There are 2 identical on my window. One on each side. They both have a 15 printd on the case (see photo). I tried to use my ruler and mat to give idea of size. I do not have any photos of them installed. Any help is appreciated. Bruce

It look like I I have a vinyl double-hung window that won't stay open. I took a picture of the piece that is good on one of the windows that does stay open. I am trying to identify what replacement part would be needed to get the window to open, stay open and close properly.

this is a handle from a vinyl gliding patio door. the manufacter is Tempco but they went out of buisness do you have one that would meet these specs mainly the screw holes and the lock cylinder.

Looking for spare parts for 5 windows The part numbers I find are, 27TGX and 27HD

My lock (the non working one) is the grey/silver tone lock. The replacement lock from Swisco is the (brass/goldtone one) You can see the brass/goldtone lock has extra metal as pointed out by my red arrow. The Swisco lock will not fit in my door and I really need a new lock..one that matches the o ... (cont.)

Hi, Do you have any recommendations? Thank you