Viewing all customer Discussions for:

Other

Need 4 single hung (2 windows) 33 inch x 1/2 inch balancers with ID BSI 3240 (backwards E). From BSI website top and bottom look like 3240-3 (60-508 top and 60-503 bot). attached photos of top and bottom.

Looking for replacement storm window hardware?.see if you can match them

I am looking for frame parts, including latches for this type of window screens. These are in front of double hung Jeld Wen windows and can slide up or down held in their position by the latches in the pictue.

I cannot seem to find the right one

looking at your window latches i think your 90-320 is the replacement but i have attached pics to verify---if it is the one can i get it in bronze or dark brown?

Looking for 2 replacement rollers. Width 5/8, wheel diameter approx 1-1/16. Overall length 4-5/8. Thanks.

Trying to find these two cartridge mortise type of door roller. The rollers are plastic and in tandem like an inline skate.

Hello. I have attached the photos of the nylon ends, hook type, and length (28"). Please let me know if you need any additional information for this Alenco window. ThanksJohn

length of channel 25 5/8" Stamp imprint - please see picture above It is a Milgard Window. Unknown manufacture date. Home built around 2005 I need two balances

Broken plastic piece on Center Mount Drawer Slide attached to bottom of kitchen drawer. Thanks!

it says truth on handle with numbers 45352 need left and right side

25.75 Need 4

Good Afternoon,I am wondering if you can help me identify this piece that broke on my crank window during our kitchen renovation and if you have one in stock. I have attached pictures.Rich

We have Simonton series 2500. Now we need to replace a Brocken latch and a broken lock on the windows. I am not sure if 90-300,26-122 will work? Please advice.

HiI'm trying to order this and I not sure what one to order and I'm sending you some photos. The channel is 1/2 wide.Please helpThanks Dan

We bought this door without a handle. We would like a keyed handle.Our door is 1-3/4" thick. It has the latch in the door, but we have no other parts.There is nothing to latch the door into.Please let us know what parts we need to make this door work.Thank you, Jim & Sue Ellen ... (cont.)

I have added the parts , and the window is single hung up and own sliding and has 2 springs on both sides . I have the rods , and spring pictures. Thx!

I have found similar ones but not sure if they will work.

These pics are from a latch/lock on the side opposite the hinge of side opening casement windows - Milgard brand. If you can help me identify the part, I'd like to order probably 3.

Hi, my name is Steve. I am looking for a window pivot parts