Viewing all customer Discussions for:

Other

I need a single hung window double pane with frame inside 38.75 x 29.25 just the window and the stripping to install.

Markings include numbers 11 4 and BSI RP

Looking for a Pella Door Weatherstrip that looks like this. i tried the home depot basic stuff but it puts too much pressure on the door and will not close properly.

What channel balance model do I need to replace this one from your stock? Thank you.

From the outside, the hinge is on the left. The part is attached to the bottom of the casement.the part attached to the window bottom is approx. 7 1/2" long with the plastic part at the end that attaches to the channel on the window frame. The movable arm that is in the middle also attaches to windo ... (cont.)

I need parts for 36" x18" Simonton window Coils pivots and pivot bars. How many coils are needed? Here are pics. The coils are 1/2 " item # 4.5 23208 not sure size of pivot shoes.

length 30 inches. Stamp # 2940 Unknown window manufacturer I need two window balances please.

It is stamped with 2740 HH B.S.I

Can you identify this weatherstripping and recommend a replacement or alternative? It has stumped every door and hardware store in Berkeley. Thank you

need replacement window balance to work in a 2220 aluminum window. The metal portion is 23" long & 9/16" deep x 1/2" wide. I don't know what brand the windows are but were installed in 1976.

Total Length: 33" Spring Length: 15" Markings: 338 338 EJ5 CMC 5

Handle for sliding patio screen door. two pieces, can't figure out how the piece with the slider comes out of the door, appears held in by a clip spring

This knob goes on my 2004 Artic Fox trailer. My stem length is 1.395 . The one you have pictured is 13/16". Do you have the longer stem length. Your knob pictured will not clear the window frame.Thanks,Gary

I'm in need of these window balancers and pins 4 of each, the coil looks to have a 6.5 on the end. Please let me know if you can help or need more information. Thanks Scott

I did not see any numbers or markings on these roller assemblies.I actually could not find any markings or model numbers on the sliding door itself either. But I do know it is made by Pella. I suspect it could be from around the early 1980's.For some basic dimensions of the roller assembly:The she ... (cont.)

Broken sliding screen door latch

NEED EITHER NEW EXACT PART OR 2 HINGES THAT WILL WORK

Need this part from the bottom of my casement window

Warm Greetings from AZ! I have 2 windows that need repaired. They are the same size. Can you tell me which channel balance part I will need to order to replace the broken ones? Thank you! Dean W

Found this number 37181031 222 140210 Need new handle mechanism.