Viewing all customer Discussions for:

Other

I need 7 left and 7 right

I'm looking for this weather seal for our windows. I can't see any markings on our windows or seals and unable to find this style in any big box stores. Hoping you could help!

Hi, I just ordered balance end brackets 15-209 form you. Unfortunately, when I went to install one, the metal wire hook that connects to the window broke. I'm attaching two photos. Can you help? Is this a part that can be replaced? Thanks!

About 27" long and 5/8" wide. Stamp appears to say "25-9 KP5 CMC 17" while the window measures 45.5" wide by 29" tall.

From a vinal window. This along with 2 other parts like hold a flat rod to side of the window. The rod goes up and down with the locking device to pull the window closed

I found this site when I was looking for the replacement of the balance spring of my single hung window. The number indicated on the frame is 2390 EK 30 and the length of the frame is 24" What series and option do you think I should order. Thanks Dante

Hi, Looking for replacement rollers for my windows. They were installed in the early '70's and for some reason wore out after 50 years. Thanks,Anthony

block & tackle channel balance marked "27 4 NM" and "BSI" or "BSL" across the top. this balance is near impossible to move along the slide. I need to replace it. would I have a choice of channel balances that would allow less force to be used opening (pulling up) the lower sash?

26" long 5/8" diameter. Wooden window frame probably built in the early 60s. Not sure if it is a block and tack, spiral, or channel type. Fits into groove on side of window. Metal piece slides up and down and is screwed into frame. Unable to find any numbers or letters on balancer. I have more pictu ... (cont.)

Hello,I have Brookhaven cabinets and as shown in the pictures above, the part that holds the sliding "rail" up, has snapped and now the drawer cannot be pulled out. The drawer otherwise is fine, but I need to replace the part that is screwed into the wall of the cabinet and holds up the sliding rail ... (cont.)

Hi,I need help replacing this handle for my sliding glass door. Inside markings:Sash Controls PT. 1963 22265 US PATENT 5125703 D340398Thank you,Laura

I have a Truth casement operator. 31876 is on the 5" arm. Your 39-220 looks like a match. But I need it in white. Ty David

This is from a bedroom nightstand which l bought from Oscar Huber back in 1992. The old bracket is stapled to the back of the drawer. Do you have this part and it made so l can fasten it back on without staples. RONTHOR REISS CORP. R-40-28.

Crank handle for ALSIDE 29 1/2 X59 1/2 crank out window.

1st photo bottom of framed shower door. It is 22 1/2 inches long. The others photos are of my shower latch

Pat#5704165 one top block says 1 and the other3

SirsThis operator is on a window that I need to fix.IMG_4007 is 4.5 inches wide.Img_4005 the arms when closed are 18inchs wide.when the window opens to 9 inches.the bracket on the window is ten inches wide.Charles

Shoe for coil balance appears to be shattered from someone forcibly removing sash from window frame. The window appears to be similar to a Metal Industries but the decal is marked "Price Rite Homecenters inc". This balance is unmarked as to weight. Also the stainless screw retaining the balance is ... (cont.)

Looking for replacement parts.

Model A-S 8192 one end has threaded hole to mount and above that is an additional screw for height adjustment