Viewing all customer Discussions for:

Other

I need the correct doorhandles for the sliding glass door with outside lock mechanism

Could this be replaced with your:

Seems to be 21" by 1/2", but I can't seem to find an exact match.

Need replacement hardware kit to include pivot shoes 12" 3/8 non tilt The 12" balancer is for a bathroom window. I'm guessing a white tip

11 3/4 height , 11 inches center to center, face plate 3/4 wide, handle set 9 1/2 tall, 4 inch screw holes center to center, off set cylinder, multi point mortise lock, Need two locks and handles

I'm sorry that there isn't a picture of the part prior to removal but it wouldn't have been very clear due to all of the gunk and build up from spraying WD-40 for so long before trying to replace the part. One of the wheels completely disintegrated and was not attached to the casing when it was remo ... (cont.)

I am looking for replacements for the plastic drawer slides that fit on the bottom of these drawers. The other picture shows the center wood piece that the plastic piece slides over . Thank you.

Unfortunately I have found no markings on this door and do not know it's age. Spread between screws is 3 3/4". Any help identifying what is needed to replace the locking mechanism, and if necessary the handles is appreciated.

Is the part in these three attached pictures number #82-218, mortice lock, round face, 3-11/16"? Please confirm this is the correct part or not.

Hope you can help me with these parts. I have 2 windows that need them.

window handle crank

In 2021 you service me and i could not have been happier. The parts that we replaced then were for two windows, then handle on the actual window that goes out, and all parts were replaced. Now its the same windown where the handle actually opens the window. I can send photo if you request. I nee ... (cont.)

Help, can't get them out to determine part.

My Polaris double hung vinyl window won't stay up. I checked the other working ones and the pivot lock shoes are what seem to be missing. Is this an easy fix?

Looking for handle replacement on my storm door Storm door is not mortise

Hi I'm trying to to find a replacement for an Anderson Sash Balancer. I see two different numbers on the balancer. One side says J86 5#23 383. The other side says 11600-2. Thanks!

Good morning, Can you tell me what balances I need to replace the original ones in my Andersen Narroline 200 series windows? The balances are stamped with T2 12#31 7 87. They are also stamped with 11600-17. The windows were installed around 1987. Thanks!

SGD-R35-71X80 I need a replacement door track. Thanks

Channel is 1/2" and its a total of 16" long including plastic, the metal part is 15" long

What's the easiest way to replace this friction shoe inside the track? Thanks!