Viewing all customer Discussions for:

Weatherization

Hi, where can I find this kind of rubber gaskets. I need about 20 pieces , 7' high. Thank you Paolo

I recently ordered item # 58-127 but could not get it into the tracks of the window. The base was too large. On measuring again I believe I now have a more accurate measurement of what is needed.... a 1/8 x 1/8 black weather-stripping. When I last called you requested photos of the window. All ... (cont.)

I'have several windows in my house in similar condition, where the weather strip has worn down, or away. I cannot ascertain the height of the pile though. The windows are all Alenco 3710/3710F Windows, manufactured in 2000-2002. Not sure which the best part would be. Thanks

Hello, I received our order for item 58-099 but the pile of 5/16" is far too short to fill the gap in the door I'm replacing the old pile for. The 9/32" width of the base is perfect but I need a taller pile length. I have a small piece of pile from another door in our building where the hei ... (cont.)

This worn out weatherstrip is tightly adhered. Do you have a replacement? If so, how is the old strip removed? Thank you.

Missing weather strip. 36". Picture shows bottom of door. There is kerf on the left side (not sure if it is necessary)

Jeld Win casement window bubble seal. Looks like it might match up to 58-183, but bubble looks a little small in comparison. Looking for a suggestion. Thank you, Tate

The width measurement of the plastic strip is 5/16" with the gasket itself being 1/4" I've included a picture of the maker and model of the windows.

Hello, Can you tell me if you sell a substitute for a Stanley door sweep? Apparently Stanley doesn't make doors any longer and we are having the same problem everyone else has had finding replacement sweeps. Thank you!

Old Peachtree patio doors need new weather strips. 3/16" X 3/16" I assume 25' / door. Worst air leaks are at the bottom of the doors. Do you have a product for that as well?

We purchased this part# 58-135 thinking it was a perfect match, however it was not. Do you have another item that is like ours, the T part needs to be rubber.

I have been looking on your website at weather stripping. I think I have the correct part number for in between the doors. But I need to find out the correct one for the bottom of the doors. The doors are a double swinging door that measure 83.25

Hello, Do you carry, or do you know where to find, the type of door sweep shown on the attached photographs? The door is a steel door. Thanks.

The figures shown for the 58-008 magnetic weatherstrip do not show the dimension from the door face to the door stop face. Mine varies from 3/8" to 5/8". Will this model weatherstrip work for that?

1/2" wide

Weather stripping The left photo is just like the door we have, and We need the top and bottom piece. (Vista Wall Adam Rite door weather stripping)

I need wool pile weatherstripping for 3 Tubelight aluminum double entrance doors. I am not sure of the age or model of the doors but they are at least 30 years old. I also need the bottom threshold seal for all three double doors if they are available. Doors had a center dead bolt at one time whi ... (cont.)

Hello, In our church model 5 years ago, we got new metal doors with windows in them. The weather stripping in the picture has worn and ripped (it is made of a rubber material, no plastic or metal parts) and it slides right into a slot on the door. I think it is weatherstripping. The width of the " ... (cont.)

Hello, I am looking for a U Shape door sweep. the door is about 48 inches I need it in almond color.

Good Afternoon! We are looking to replace the weather stripping to our Church Doors and need help looking for the right size of stripping. I have submitted pictures, both doors i've noticed have different measurements. Please help