Viewing all customer Discussions for:

Weatherization

We purchased this part# 58-135 thinking it was a perfect match, however it was not. Do you have another item that is like ours, the T part needs to be rubber.

I have been looking on your website at weather stripping. I think I have the correct part number for in between the doors. But I need to find out the correct one for the bottom of the doors. The doors are a double swinging door that measure 83.25

Hello, Do you carry, or do you know where to find, the type of door sweep shown on the attached photographs? The door is a steel door. Thanks.

The figures shown for the 58-008 magnetic weatherstrip do not show the dimension from the door face to the door stop face. Mine varies from 3/8" to 5/8". Will this model weatherstrip work for that?

1/2" wide

Weather stripping The left photo is just like the door we have, and We need the top and bottom piece. (Vista Wall Adam Rite door weather stripping)

I need wool pile weatherstripping for 3 Tubelight aluminum double entrance doors. I am not sure of the age or model of the doors but they are at least 30 years old. I also need the bottom threshold seal for all three double doors if they are available. Doors had a center dead bolt at one time whi ... (cont.)

Hello, In our church model 5 years ago, we got new metal doors with windows in them. The weather stripping in the picture has worn and ripped (it is made of a rubber material, no plastic or metal parts) and it slides right into a slot on the door. I think it is weatherstripping. The width of the " ... (cont.)

Hello, I am looking for a U Shape door sweep. the door is about 48 inches I need it in almond color.

Good Afternoon! We are looking to replace the weather stripping to our Church Doors and need help looking for the right size of stripping. I have submitted pictures, both doors i've noticed have different measurements. Please help

Here are some pictures of the doors that need the Amarlite weatherstrip replaced. The dimensions of the weatherstrip is 5/8" wide x 1/4" deep. Due to the lock on the doors, the top portion is 32 1/2" and the bottom portion is 45 1/2". It is 1/8" - 3/16" between the double doors. There are 2 sets of ... (cont.)

Hello, Can you tell me by looking at the attached pictures whether I can use foam spline in this screen frame? I'm currently using flat spline, .29 width. Thank you! Darryl

Photos of weatherstrip I`m looking for

I have a entrance metal entrance door that has kerf compression weatherstrip but the kerf is 1/4" not 1/8". I cannot find any replacement weatherstrip. Do you have any?? Thanks

I have some 25 year old doors with magnetic seals that need replacement. he doors themselves are metal but I have wood framing. Can I staple or nail the 58-008 set to the frame (it appears as if it will work)? The original seals are glued.

I have over 15 3-part crank out windows in a 1965 condo. I love the windows, but they need new seals. Photos are attached. The little seal that runs along each window has practically no "base extension" but the portion that slides in the groove is 1/8 inch wide. I fear 3/16 may be too wide to f ... (cont.)

This is a terrible sample, but it's the best I could do. In the photo, the part facing up attaches to the bottom of the door. The portion facing down is missing pieces that form the door sweep. The distance between the two prongs that hold the door bottom to the door is 5/8". The distance to the ... (cont.)

Hope you can provide info so I can order correct part. I have a metal exterior front Stanley #28915 door with wood bottom to attach sweep. Swri # is 98038-05-01. Size is 36" wide x 1/34 " thick. See attached photos , thanking you in advance for your help on this.

I am still trying to get the right insulation for my window I requested the 58-002 and the 58-021 but neither work for my window, so I figured I would take a better picture. We bought an older house, and I need help. Please see my "better" pictures as I am still scratching my head how to remedy thi ... (cont.)

just looking for pile that is 1/4 wide by 5/16 tall