Viewing all customer Discussions for:

39-094 Andersen Straight Arm Operator, 9 3/8" Arm

My crank window opener is cracked and when I turn It doesnt close. It measures 4.5 inches long with 2 screw holes on top left and right. Casement window.

Hello, Can you suggest a replacement part for this crank. The worm gear wants to back out when trying to close the windowand the cog looks stripped. The swing arm is approximately 9 1/2 inches long. Thank you . Stan

need one left side two right side hare ware and handles for 16in window pictured

6 windows

Hi. This kitchen crank window is at least 20 years old. I'd like replace the crank handle and base. The glass has a "Anderson 2-1" painted on the glass in sort of a white triangle. Please advise if you have a replacement kit for the hardware. Thank you.

Please let me know if you have above parts available

Anderson casement windows need to cranks both left and right only markings are Anderson Windiow walls Bayport Minnesota on the left side crank there is a letter s and the number 109 printed on it

Please identify part and price.

I don't know the model or year it was made all I can see is number on handle 60-c-7041-62 please help hope the picture helps Thanks . Carlos

the open has a solid 14" arm #7073B stamped on it. 4 teeth on each one are worn off. Does your #39-094 &39-095 reface it? also with the #39-286 handle? Will I have to build up any or move over the notch in the trim strip?

Looking Window operator in gray

I need 2 of these Andersen window cranks. Would you please see if you can find it for me

Lettering on arm says Anderson Windowallsreverse has stock no. 7198-17Picture Window crank 1 shows sharp edge where it may have been broken off

Mr Handyman will install.

Can you replace a 9 3/8 operator with an 8 3/8 operator?

Looking for a left sided window crank replacement for Anderson casement window. The crank on the right has CX4-CX5 on it. The crank arm measures approx 111/2 inches

Hi my name is Cindy. I'm looking for a part of a Anderson windows. Built in the 50s... I need a replacement a spline gear. can u help...the first one is in bed rooms and the side ones our front windows. Have to use a a tool to open and close them. By turning the silver spline with a pair of grips, t ... (cont.)

A. Photos show a LEFT hand operator (I'll probably need a RIGHT hand, also).B. Note the tip "glide" point on the arm is a "DISC'", not the more common rectangular "SHOE".C. No other markings or identifiers on the window frame, glass, etc. (really? couldn't stamp a Model# next to your company name ... (cont.)

We have some windows with needed parts, as you can see in pictures rusted. Looks like we need a channel guide and arm.Looking to replace butterfly handles with crank style handles. Anderson windows. Can you help identify your part number. Thank you.

I need help finding this part. All I know about it is that it is an anderson casement and I am going to need 1 left handed and 1 right handed. Thank you!