Viewing all customer Discussions for:

39-095 Andersen Straight Arm Operator, 9 3/8" arm

I am trying to have my window hardware replaced. It is a 1970's condo I need to at least replace one side that has become broken off from window frame and figured I may as well do both as I am preparing to put on market.

Hello looking to replace the entire hardware for my window. I need the Operator, track, handle, latch both right and left sides. These windows likely go back a far 60's or 70's. can you please links where I find this hardware on your site?

please review my photos and provide me with some replacement options.

Anderson right hand window crank. Number 54 on it. About 11 inches pin to pin on single stiff arm

Narrow kitchen window. Crank style. Plastic gear teeth broken. Can open but cannot close

I have Anderson windows since 1985. The hand crank does work worm gear is worn out. I can't read on the windows model number or Serial number. Do you have any of vices.

The stamp on the metal is 7168-20

My crank window opener is cracked and when I turn It doesnt close. It measures 4.5 inches long with 2 screw holes on top left and right. Casement window.

Hello, Can you suggest a replacement part for this crank. The worm gear wants to back out when trying to close the windowand the cog looks stripped. The swing arm is approximately 9 1/2 inches long. Thank you . Stan

need one left side two right side hare ware and handles for 16in window pictured

6 windows

Hi. This kitchen crank window is at least 20 years old. I'd like replace the crank handle and base. The glass has a "Anderson 2-1" painted on the glass in sort of a white triangle. Please advise if you have a replacement kit for the hardware. Thank you.

Please let me know if you have above parts available

Anderson casement windows need to cranks both left and right only markings are Anderson Windiow walls Bayport Minnesota on the left side crank there is a letter s and the number 109 printed on it

Please identify this part and price it thanks

the end of the arm has a u shaped slider that connects to the operator channel that slides up and down as the casement window opens and closes. the outside part of that slider has broken off. Thus the window will open, but not pull shut. it appears the arm is about 9 and 3/8 the best i can measur ... (cont.)

I don't know the model or year it was made all I can see is number on handle 60-c-7041-62 please help hope the picture helps Thanks . Carlos

the open has a solid 14" arm #7073B stamped on it. 4 teeth on each one are worn off. Does your #39-094 &39-095 reface it? also with the #39-286 handle? Will I have to build up any or move over the notch in the trim strip?

Looking Window operator in gray

I need 2 of these Andersen window cranks. Would you please see if you can find it for me